No. SS2-8113-0310 Azbil Corporation - 18 - Figure 4 Actuator orientation Note) 1) Indicate by position number when installation other then the standard type is required. 2) With type PSA6R and Type VP actuators, the side-mounted hand wheel are mounted on the same side as the positioners. No. 1 (standard type) No. 2 No. 3 No. 4 Ordering information When ordering, please specify; 1) 2) 3) 4) 5) 6) 7) 8) Model Number: HSC Nominal size × Cv required Type and rating of end connections Body and trim material Type of bonnet Valve and plug characteristics Type of actuator, necessity of manual hand wheel, air pressure to diaphragm Valve action (direct or reverse) 9) 10) 11) 12) 13) 14) 15) Accessories (pressure regulator with filter and etc.) Special requirement of oil/water free treatment, copper free treatment, etc. Name of flow medium Normal flow and maximum required flow Pressure of flow medium, upstream and downstream pressure at maximum and minimum required flow Temperature and specific gravity of flow medium Viscosity of flow medium, inclusive or exclusive of slurry Side-mounted handwheel Side-mounted handwheel Flow direction Flow direction Positioner Side-mounted handwheel Flow direction Flow direction Positioner Positioner Side-mounted handwheel Flow direction Flow direction Positioner Side-mounted handwheel Flow direction Flow direction Positioner Positioner