No. SS2-8110-0500 Azbil Corporation - 4 - Please, read ‘Terms and Conditions’ from following URL before the order and use. http://www.azbil.com/products/bi/order.html (11) 1-12-2 Kawana, Fujisawa Kanagawa 251-8522 Japan http://www.azbil.com/ Specifications are subject to change without notice. No part of this publication may be reproduced or duplicated without the prior written permission of Azbil Corporation. 8th edition: Aug. 2015 1st edition: May 2001 Thread type Flange type Figure 2 Actuator orientation Note) Indicate by position number when installation other than the standard type is required. No. 1 (Standard) No. 2 (SV0501-200) No. 3 (SV0501-300) No. 4 (SV0501-400) No. 4 (SV0501-0400) (Standard) No. 3 (SV0501-300) Ordering Information When ordering, please specify; 1) 2) 3) 4) 5) 6) 7) 8) Model Number: VSM Cv required. Body rating and type of end connection. Body and trim material, necessity of hardening. Valve characteristics and type of plug. Type of actuator, and supply air pressure. Valve action (direct or reverse) Necessity of positioner, pressure regulator with filter 9) 10) 11) 12) 13) 14) Necessity of special spec. such as oil-free, copper free and etc. Name of flow medium. Normal flow and maximum flow required. Pressure of flow medium, upstream and downstream pressure (at fully closed and fully opened). Temperature and specific gravity of flow medium. Viscosity of flow medium, inclusive or exclusive of slurry. Positioner Positioner Flow direction Flow direction Flow direction Flow direction Positioner Positioner