Azbil Corporation No. SS2-8113-0220 - 9 - Figure 5 Actuator orientation Note) 1) Indicate by position number when installation other than the standard type is required. No. 1 (Standard type) No. 2 No. 3 No. 4 Ordering information When ordering, please specify; 1) 2) 3) 4) 5) 6) 7) 8) 9) Model number: HLS Nominal size × Cv required Type and rating of end connections Body and trim material, necessity of hardening Type of bonnet Jacket type, rating, connection, material Valve and plug characteristics Type of actuator, air to diaphragm Valve action (direct or reverse) 10) 11) 12) 13) 14) 15) 16) Accessories (positioner, hand wheel, pressure regulator etc.) Special requirement of degreasing, free from copper and etc. Name of flow medium Normal flow and maximum required flow Pressure of flow medium, upstream and downstream pressure at maximum and minimum, required flow Temperature and specific gravity of flow medium Viscosity of flow medium, inclusive or exclusive of slurry Side-mounted hand wheel Side-mounted hand wheel Flow direction Flow direction Positioner Side-mounted hand wheel Flow direction Flow direction Positioner Positioner Side-mounted hand wheel Flow direction Flow direction Positioner Side-mounted hand wheel Flow direction Flow direction Positioner Positioner 1 4