No. SS2-ACP110-0100 Azbil Corporation - 4 - Structural drawing of trim and body/trim material combinations Following table shows typical body/trim material combinations. Please contact us about materials not listed in this table. Figure 2 Temperature / normal differential pressure ranges requiring Stellite Note) For cavitation / flashing service or oil free service, Stellite is recommended regardless of temperature and differential pressure. a. Plain bonnet b. Extension bonnet type 1 Figure 3 Structural drawing of trim Table 4 The valve body material is carbon steel (SCPH2/A216WCB), and bonnet type is plain. ..Valve plug A351CF8M SCS24 A351CF8M Stellite ..Cage(Upper) A351CF8M SCS24 A351CF8M ..Cage(Lower) A351CF8M/SUS316 SCS24 A351CF8M/SUS316 Stellite ..Valve stem SUS316 ..Seal ring MoS2-inserted PTFE, Hastelloy C276 with spring ..Scraper ring Carbon-inserted PTFE ..Seat gasket General Oil free Spiral gasket (hoop:SUS316, filler:inorganic paper) Spiral gasket (hoop:SUS316, filler:PTFE) ..Bonnet gasket SUS316 SUS316(PTFE coating) 1470 {15} kPa {kgf/cm2} 981 {10} 490 {5} 0 -196 0 +100 +200 +300 Stellite Normal differential pressure Fluid temperature ( C) 5 6 Valve stem Bonnet gasket Seal ring Cage(Upper) Cage(Lower) Seat gasket Scraper ring 7 3 1 8 4 2 Valve plug 4 7 2 3 1 6 5 Valve stem Bonnet gasket Cage(Upper) Cage(Lower) Valve plug Expander spring Seal ring