- 1 - 9th edition No. SS2-8110-1200 OVERVIEW Model VDC high pressure service control valve with body rating of ANSI 900, JIS 63K or up provides pressure balancing hole in the valve plug, thus, effectively eliminate the unbalanced thrust force on the plug, and relatively small actuator is selectable for high pressure differential service. The entire valve plug is housed wholly in the cage and guided by guiding part, which makes it durable construction both against vibration and wear. SPECIFICATIONS Body Type Straight through, cast glove valve Nominal size 1., 2, 2., 3, 4, 5, 6, 8, 10, 12 inches Pressure rating . JIS 63K . ANSI 900, 1500, 2500 End connections . Flange end ; . Welded end ; SW (1., 2 inches) BW (3 to 12 inches) Material Carbon steel (SCPH2), Low alloy steel (SCPH21, 32, 61) Stainless steel (SCS13) and other alloy steel Bonnet Plain bonnet (0 to 200°C) Radiator finned bonnet (over 200°C) Gland type Bolted gland Packing / Grease Grease provided Graphite packing is used Connection type Pressure rating Applicable standard RF JIS63K JIS B2217-1967 ANSI Class 900, 1500, 2500 ANSI B16.5-1968 JPI Class 900, 1500, 2500 JPI-7S-15-1993 RJ ANSI Class 900, 1500, 2500 ANSI B16.5-1968 JPI Class 900, 1500, 2500 JPI-7S-15-1993 Gasket Type Combination of serrated and flat gasket Material Stainless steel, copper, or aluminum Trim Valve plug Pressure balanced type Cage Metal seat Equal percentage (%V) Linear (LV) Cage design Split cage type Material Stainless steel (SCS13 Atomlloy treatment) and other alloy steel High Pressure Service Cage type Double Seated Control Valves (Rating: ANSI 900 to 2500) Model VDC 2 6 Specifications are subject to change without notice. “This product is designed for general industrial use.”