No. SS2-ACN110-0100 Azbil Corporation - 4 - Structural drawing of trim and body/trim material combinations Following table shows typical body/trim material combinations. Please contact us about materials not listed in this table. a. Plain bonnet b. Extension bonnet type 1 Figure 3 Structural drawing of trim Table 4 The valve body material is carbon steel (SCPH2/A216WCB), and bonnet type is plain. ..Valve plug A351CF8M A351CF8M Stellite ..Cage(Upper) A351CF8M A351CF8M ..Cage(Lower) A351CF8M/SUS316 A351CF8M/SUS316 Stellite ..Valve stem SUS316 ..Seal ring MoS2-inserted PTFE, Hastelloy C276 with spring ..Scraper ring Carbon-inserted PTFE ..Seat gasket General Oil free Spiral gasket (hoop:SUS316, filler:inorganic paper) Spiral gasket (hoop:SUS316, filler:PTFE) ..Bonnet gasket SUS316 SUS316(PTFE coating) Table 5 The valve body material is carbon steel (SCPH2/A216WCB), and bonnet type is extension type 1 for high temperature. ..Valve plug A351CF8M Stellite ..Cage(Upper) A351CF8M ..Cage(Lower) SUS316 Stellite ..Valve stem SUS316 ..Seal ring Carbon impregnated with antimony ..Expander spring Inconel X-750 ..Bonnet gasket SUS316 1 Valve plug 7 Seat gasket 5 Seal ring 4 Valve stem 2 Cage(Upper) 3 Cage(Lower) 6 Scraper ring 8 Gasket for bonnet 5 Seal ring 6 Seal ring 1 Valve plug 4 Valve stem 7 Expander ring 2 Cage(Upper) 3 Cage(Lower) 8 Gasket for bonnet