- 1 - 7th edition No. SS2-8114-0200 CV3000 Series Electric Small-Port Single Seated Control Valves Model HLS OVERVIEW Model HLS Small-Port Single Seated Control Valves are designed for heavy duty service. The compact valve body, having an S-shaped flow passage that features low pressure loss, allows a large flow capacity, rangeability, and high accuracy flow characteristics. The valve plug are available in a wide range of Cv values. The flow shut-off performance complies with the ANSI Standards. The actuator section performs ON-OFF operation or proportional operation by directly receiving the signal of 4 to 20 mA DC or 1 to 5V DC from the electronic-type controller. The provided electric-type actuator offers high accuracy, compactness, and sturdy structure. The model HLS Valves are widely applicable for reliable control of small flow in process lines. SPECIFICATIONS Body Type Straight-through, cast globe valve Nominal size 1/2, 3/4, 1 inch Pressure rating . JIS 10K, 16K, 20K, 30K, 40K . ANSI Class 125, 150, 300, 600 . JPI Class 125, 150, 300, 600 End connection . Flanged end; . Welded end; SW, BW Connection type Pressure rating Applicable standard FF JIS10K JIS B2210-1984 ANSI Class 125 ANSI B16.5-1981 JPI Class 125 JPI-7S-15-1993 RF JIS10K, 16K, 20K, 30K, 40K JIS B2210-1984 ANSI Class 150, 300, 600 ANSI B16.5-1981 JPI Class150, 300, 600 JPI-7S-15-1993 RJ, LG ANSI Class 150, 300, 600 ANSI B16.5-1981 JPI Class 150, 300, 600 JPI-7S-15-1993 Tongue and groove(groove) Male and female(female) JIS16K, 20K, 30K, 40K JIS B2202-1984 Material For body/trim material combinations and operating temperature ranges, refer to Table 1. Bonnet style . Plain bonnet (-17 to 230°C) . Extension bonnet Type 1 (-45 to -17°C and 230 to 566°C) . Extension bonnet Type 2 Integral cast type (-100 to -45°C) Welded type (-196 to -100°C) . Bellows type For operating temperature and pressure range, refer to Figure 2. Note) Take care not to exceed the operating temperature ranges specified for respective materials. Gland type Bolted gland Packing / Grease . Grease not provided; When V shaped PTFE packing or PTFE yarn packing is used. . Grease provided; When graphite packing is used. Note) PTFE: Polytetrafluoroethylene. 6 2 Specifications are subject to change without notice. “This product is designed for general industrial use.”