Azbil Corporation No. SS2-8114-1100 - 3 - Accuracy: Within ± 2% F.S. Dead band: Within 1% F.S. Hysteresis error: Within 2% F.S. Linearity: Within ±2% F.S. Operating time: (fully open .. fully closed, load reference value) Valve size 1., 2 inches: 21 sec. 2. to 4 inches: 32 sec. 6 inches: 31 sec. 8 inches: 47 sec. Dimensions Refer to Figure 7, Table 12 and Table 13. Weight Refer to Table 14. Block diagram Refer to Figure 8. Terminal connection Refer to Figure 9. Finish Valve body and bonne t; Blue (Munsell 10B5/10) or silver. Actuator ; Silver Table 1 Body/trim material combinations and operating temperature ranges (°C) Body Material Trim material JIS FC200 SCPH2 SCPH21 SCPH61 SCPL1 SCS11 SCS13A SCS14A SCS16A SCS19A ASTM A126Gr.B A216WCB A217WC6 A217C5 A352LCB A351CF8 A351CF8M A351CF3M A351CF3 JIS SCS24 0 ~ 200 -5 ~ 425 -5 ~ 425 -5 ~ 425 -45 ~ 350 JIS SCS11 -5 ~ 300 -5 ~ 300 JIS SCS14A 0 ~ 200 -5 ~ 300* -5 ~ 300* -5 ~ 300* -45 ~ 300 -196 ~ 300 -196 ~ 300 JIS SCS16A -45 ~ 300 -196 ~ 300 -196 ~ 300 -196 ~ 300 JIS SCS19A -45 ~ 300 -196 ~ 300 -196 ~ 300 -196 ~ 300 JIS SCS11 Stellite -5 ~ 300 -50 ~ 550 JIS SCS14A Stellite -5 ~ 425* -5 ~ 550* -5 ~ 556* -45 ~ 350 -196 ~ 550 -196 ~ 450 JIS SCS16A Stellite -45 ~ 350 -196 ~ 450 -196 ~ 450 -196 ~ 450 JIS SCS19A Stellite -45 ~ 350 -196 ~ 450 -196 ~ 450 -196 ~ 450 JIS SCS14A Atomroy -5 ~ 425* -5 ~ 500* -5 ~ 500* JIS SCS24 Soft seat 0 ~ 200 -5 ~ 200 -45 ~ 200 JIS SCS11 Soft seat -50 ~ 200 -50 ~ 200 JIS SCS14A Soft seat 0 ~ 200 -5 ~ 200 -45 ~ 200 -80 ~ 200 -80 ~ 200 JIS SCS16A Soft seat -45 ~ 200 -80 ~ 200 -80 ~ 200 -80 ~ 200 -80 ~ 200 Note) 1. Asterisk marked (*) combinations, split cages are used when fluid temperature exceeds 230 °C and valve size is greater than 3 inches 2. “ ” shows standard combination of valve body and trim materials. 6 4