Azbil Corporation No. SS2-GTX00R-0100 - 33 - Model GTX35R(Remote-sealed type for standard differential pressure) Model GTX40R(Remote-sealed type for high differential pressure) Flush 3/4 inches, 1/2inches flange type for regular/ high temperature/ oxygen/ chlorine service) Model No.:GTX_ _R-Selection I(I II III IV V VI VII)-Selection II(I II III IV V VI)-Option *1 Small flange mounting kit model (HF-) should be selected. *2 The combination with model: SDR (Elliptical Tube Flowmeter) is not available. *3 In case code 5 is selected, wetted parts material 316 SST or ASTM B575 should be selected. *4 In case code 6 is selected, wetted parts material 316 SST should be selected. *5 Not applicable for code 6 of Flange type. *6 Not applicable for code 5 and 6 of Flange type. *7 Not applicable for the combination with code A2 "With external Zero/Span adjustment", Q1 "Safety Transmitter", and Q2 "NAMUR NE43 Compliant Output signal limits" of Option. Basic Model No. Measuring span 2.5 to 100 kPa (250 to 10,160 mmH20) GTX35R Flush flange type 3/4 inches (20 mm), 35 to 700 kPa (0.35 to 7 kgf/cm2) GTX40R 1/2 inches(15 mm) Selection I I Output 4 to 20 mA (SFN Communication) A 4 to 20 mA (HART Communication) B Digital output (DE communication) *7 D II Fill fluid Regular type (Silicone oil) A For high temperature service (Silicone oil) B For oxygen service (Fluorine oil) H III Wetted parts material 316 SST (Diaphragm:316L SST) A ASTM B575 (Equivalent to Hastelloy C-276) *5 B 316L SST *6 D IV Flange rating No flange XX V Flange size For small size flange X VI Flange type For small flange type with adapter, rear connection to capillary *1 1 For small flange type with no adapter, rear connection to capillary 3 For small flange type, corrosion resistant model with adapter, rear connection to capillary *1 *2 *3 5 For small flange type, high model with adapter, rear connection to capillary *1 *2 *4 6 VII Flange material/ bolt and nut material Flange Bolt and nut No flange 304 SST 1 No flange 630 SST 3 No flange Carbon steel 4 VIII Gasket face finish None Standard JISRa3.2 (12.5S)) A IX Capillary length 2 m 02 3 m 03 4 m 04 5 m 05 2 m (with Olefin Cover) A2 3 m (with Olefin Cover) A3 4 m (with Olefin Cover) A4 5 m (with Olefin Cover) A5 1 6