Azbil Corporation No. SS2-GTX00U-0100 - 9 - To use the remote seal type transmitter correctly A various accuracy regulation and notes of the remote seal type transmitter are as follows. χ : Shown for each item are the percentage ratio for χ (kPa), which is the greatest value of either the upper range value (URV)*1, the lower range value (LRV)*2 or the span. L : Flange length (mm) (In case, standard flange;L=0mm) ΔΤ : Temperature difference between upper flange and ambient temperature. A. Standard accuracy Linearity in constant ambient temperature and constant static pressure is shown. (Refer to “PERFORMANCE SPECIFICATIONS” on page 11) B. Ambient temperature characteristics Accuracy by the ambient temperature change in the main body under constant static pressure is shown. (Refer to “PERFORMANCE SPECIFICATIONS” on page 11) D. Wetted parts temperature characteristics Zero shift is shown, when the temperature fluctuate of process wetted parts of an upper flange and lower flange changes. Flange type 3 inches flush diaphragm flange 4 inches Extended diaphragm flange Fill fluid Regular / High temp. High-temp. and vacuum High-temp. and high-vacuum Wetted parts temperature characteristics (total shift of setting ranges) % % % Flange type 2 inches flush diaphragm flange 3 inches Extended diaphragm flange 1/2 inch flush diaphragm flange 1.5 inch flush diaphragm flange 2 inches extended diaphragm flange Fill fluid Regular / High temp./ High-temp. and vacuum / High-temp. and high-vacuum Wetted parts temperature characteristics (total shift of setting ranges) % % C HI A B Liquid 600 2L 50 .. + ------.. .. .. 1 55 ----- Δ T 1000χ × × --------------- .. .. .. .. .. .. ± 900 2L 50 .. + ------.. .. .. 1 55 ----- Δ T 1000χ × × --------------- .. .. .. .. .. .. ± 120 3L 50 .. + ------.. .. .. 1 55 ----- Δ T 1000χ × × --------------- .. .. .. .. .. .. ± (5 + 0.008L) Δ T 2000χ × --------------- .. .. .. .. .. .. (5 + 0.008L) Δ T 2000χ × --------------- .. .. .. .. .. .. ± 1 7