Azbil Corporation No. SS2-GTX00U-0100 - 21 - Model GTX60U/GTX71U(Remote-sealed type for high gauge pressure) Extended 3 inches, 2 inches flange type for regular/ high temperature/ oxygen/ chlorine service Model No.:GTX_ _U-Selection I(I II III IV V VI VII VIII IX) - Selection II -Option II *1 In case of “ANSI/JPI600” is used for 3in. Flange type and rating, not available for the extended diaphragm flange type. *2 In case Fill Fluid: For high-temperature service: ANSI/JPI600 and Wetted Parts material: SUS316L, Extension length of Flange 200/250/300mm are not available. *3 Not applicable for the combination with code A2 "With external Zero/Span adjustment", Q1 "Safety Transmitter" and Q2 "NAMUR NE43 Compliant Output Signal Limits" of Option. Basic Model No. Measuring span 35 to 3500kPa (0.35 to 35kgf/cm2) GTX60U Extended flange type 3 inches (80mm), 2 inches(50mm) 0.7 to 10MPa (7 to 102kgf/cm2) GTX71U Selection I I Output 4 to 20mA (SFN Communication) A 4 to 20mA (HART Communication) B Digital output (DE communication) *3 D II Fill fluid Regular type (Silicone oil) A For high temperature service (Silicone oil) *2 B For oxygen service (Fluorine oil) H III Wetted parts material 316 SST (Diaphragm:316L SST) A 316L SST *2 D IV Flange rating ANSI150 A1 ANSI300 A2 ANSI600 *1 *2 A3 JIS10K J1 JIS20K J3 JIS30K J4 JPI150 P1 JPI300 P2 JPI600 *1 *2 P3 V Flange size 2in./50A *2 E 3in./80A *1 F VI Flange type Extended Length 50mm *1 B Extended Length 100mm *1 C Extended Length 150mm *1 D Extended Length 200mm *1 *2 E Extended Length 250mm *1 *2 F Extended Length 300mm *1 *2 G VII Flange material/ bolt and nut material Flange Bolt and nut 304 SST 304 SST A 304 SST 630 SST C 304 SST Carbon steel D 316 SST 304 SST E 316 SST 630 SST G 316 SST Carbon steel H 316L SST 304 SST J 316L SST 630 SST L 316L SST Carbon steel M VIII Gasket face finish None Standard JISRa3.2(12.5S) A IX Capillary length 2m 02 3m 03 4m 04 5m 05 2m (with Olefin Cover) A2 3m (with Olefin Cover) A3 4m (with Olefin Cover) A4 5m (with Olefin Cover) A5 1 7