No. SS2-DST100-0700 Azbil Corporation - 2 - Power supply and load resistance 17 to 45V DC. A load resistance of 250 Ω or more is necessary between loops. (See Figure 2.) Ambient temperature Normal operating range -15 to +65 °C (for general purpose models) -10 to +65 °C (for oxygen service models) -15 to +65 °C (digital indicator model) Operative limits -40 to +70 °C (for general purpose models) -40 to +70 °C (for oxygen service models) -30 to +70 °C (digital indicator model) TIIS Flameproof model -15 to +60 °C KOSHA Flameproof model -15 to +60 °C Temperature range of wetted parts Normal operating range -15 to +65 °C (for general purpose models) -10 to +65 °C (for oxygen service models) Operative limits -40 to +70 °C (for general purpose models) -40 to +80 °C (for oxygen service models) -30 to +70 °C (digital indicator model) TIIS Flameproof model -15 to +60 °C KOSHA Flameproof model -15 to +60 °C Ambient humidity 10 to 90 % RH Stability against supply voltage change ±0.005 % F.S./V Lightning protection Peak value of voltage: 100 kV Peak value of current: 1000 A Dead time Approx. 0.4 sec. Damping time Selectable from 0 to 32 sec. in ten stages Output saturation point Upper limit: 20.8 mA lower limit: 3.8 mA Vibration characteristics Amplitude 1.5 mm / Frequency 0 to 9 Hz Acceleration 5 m/s2 (0.5 G) / 9 to 60 Hz PHYSICAL SPECIFICATIONS Materials Fill fluid For general purpose (Silicone oil) For oxygen service (Fluorine oil) Center body SUS316 Transmitter case Aluminum alloy For wetted parts Meter body cover SCS14A (SUS316 equivalent) Centerbody SUS316 (Diaphragm SUS316L) Vent plugs SUS316 Gaskets FEP Bolts and nuts (for meterbody covers) Carbon steel (SNB7), SUS304 Finish Housing Light beige (Munsell 4Y7.2/1.3) Cap Dark beige (Munsell 10YR4.7/0.5) Weight Approx. 4.4 kg INSTALLATION Electrical connection G1/2 internal thread Grounding Resistance 100 Ω max. Mounting Can be installed on a 2-inch horizontal or vertical pipe (can be directly mounted on a process pipe). Process connection Rc1/2, Rc1/4