Azbil Corporation No. SS2-DST100-0700 - 3 - OPTIONAL SPECIFICATIONS Elbow This is an adaptor for changing the electrical conduit connection port from the horizontal to the vertical direction, if required by wiring conditions in the field. One or two elbows may be used as needed. Water free treatment (including oil free treatment) The transmitter is shipped with dry and oil-free wetted parts. Oil free treatment The transmitter is shipped with oil-free wetted parts. Test report The test report indicates the results of appearance, I/O characteristics, insulation resistance, and breakdown voltage tests. Material certificate The material certificate shows the chemical composition, heat-treatment conditions, and mechanical properties of the materials used for the wetted parts. Strength calculation sheet The strength calculation sheet indicates the strength of the meter body cover, flanges, bolts and etc. Withstand pressure and air tight test (for general purposes) The withstand pressure and air tight test result sheet shows the results of a pressure resistance test (under water pressure for 10 minutes) and a gas-tightness test (using N2 gas for 10 minutes) performed on the wetted parts. DP: Differential pressure DPLRV.: Value to output 0 % (4 mA) of differential pressure DPSPAN: Span of differential pressure range PP: Static pressure (process pressure) PPREF.: Designed process pressure PPELV.: Elevation value of static pressure PT: Process temperature PTREF.: Designed process temperature PTELV.: Elevation value of temperature Figure 1 Calculation equation Differential pressure Temperature Static pressure DP PP PT PP - PPELV. PPREF PTREF PT - PTELV. DP - DPLRV. DPSPAN Output Figure 2 Supply voltage and load resistance characteristics Figure 3 Working pressure and temperature of wetted parts 250 1243 0 24 45 Supply voltage - 17.9 0.0218 R = Load resistance R (Ω) 280 17 23.4 Supply voltage E (V DC) Operative range -40 2.0 5.3 8.0 13 27 53 80 101.3 Working pressure P (kPa {mmHg} abs.) Temperature of wetted parts ( C) -18 40 50 60 65 70 80 85 1.3 133.3 Normal operating range Unusable range Operative limit Operative limit 1 9