Azbil Corporation No. SS2-PTG300-0100 - 19 - MODEL SELECTION Smart pressure transmitter model PTG7XF Process connection: Flange type Measuring span: 2.0 to 100 kPa, 40 to 400 kPa, 0.2 to 2 MPa, 1 to 10 MPa Model number structure: Basic model number - Selection - Option1 - Option2 Selection Option1Option2 Note) *1 The 2 inches / 50 mm “code 3” in the Flange diameter can not be selected. *2 Only applicable for the JIS20K “code C” in the Flange standard / rating. *3 Applicable only for water and dust proof “N” and FM intrinsically safe “E” in the Type of protection. Basic model number - - - Product description Gauge pressure transmitter: Flange mount type with SFN communication PTG71F Gauge pressure transmitter: Flange mount type with HART communication PTG72F - Type of protection Water and dust proof: IEC IP67 Electrical connection:1/2NPT N FM Explosionproof and dust-ignition Electrical connection:1/2NPT D FM Intrinsically safe Electrical connection: 1/2 NPT E KOSHA Flameproof Electrical connection: 1/2 NPT K NEPSI Flameproof and dust-ignition Electrical connection:1/2 NPT L ATEX Flameproof Electrical connection: M20 × 1.5 V Measuring span 2.0 to 100 kPa (0.021 to 1.019 kgf/cm2) 3 40 to 400 kPa (0.408 to 4.07 kgf/cm2) 4 0.2 to 2 MPa (2.04 to 20.3 kgf/cm2) 5 1 to 10 MPa (10.20 to 101.9 kgf/cm2) 6 Material Diaphragm / wetted parts other than diaphragm/ fill fluid SUS316L/SUS316L/Silicone oil C1 SUS316L/SUS316L/Propylene glycol CB Flange standard/rating JIS10K A JIS20K *1 C JIS30K D ANSI 150 G ANSI 300 H ANSI 600 J Flange diameter 2 inches / 50 mm 3 1 inch / 25 mm *2 5 1/2 inch / 15 mm 7 Flange material SUS304 S Flange extension None X Option 1 - No option X Built-in digital indicator M Corrosion-proof finish B Wetted parts finish Oil free finish G Water and oil free finish H Option2 - No option X Test report 1 Material certificate 2 Withstand pressure test 4 Strength calculation sheet (JIS) 5 Traceability certificate 6 Non SI unit F Electrical connection:M20 × 1.5 adapter *3 T 1 10