Azbil Corporation No. SS2-GTX00F-0100 - 5 - PHYSICAL SPECIFICATIONS Materials Fill fluid Silicone oil for general purpose models Fluorine oil for oxygen and chlorine models Center body 316 SST Transmitter case Aluminum alloy, CF8M (Equivalent to 316 SST) Meter body cover SCS14A (equivalent to 316 SST) or 316 SST For Wetted parts Adapter flange (option) SCS14A (equivalent to 316 SST) Center body 316 SST (316L SST for diaphragm only) ASTM B575 (Hastelloy C-276 equivalent), Tantalum, 316L SST Vents and plugs 316 SST Gaskets FEP Flange materials 304 SST, 316 SST, 316L SST Weight Approx. 5.9 kg (in case of ANSI 150# - 1-1/2 inches flange) INSTALLATION Electrical connection 1/2NPT internal thread, M20 internal thread. Grounding Resistance 100 Ω max Mounting Direct mounting on the process side Process connection Measured pressure (liquid side) Flush diaphragm JIS 10K, 20K, 30K and 63K:40, 50 and 80mm (RF) equivalents ANSI/JPI 150, 300 and 600:1.5, 2, 3 inches (RF) equivalents Extended diaphragm JIS 10K, 20K and 30K: 50, 80 and 100mm(RF) equivalents ANSI/JPI 150, 300 and 600:2, 3 inches (RF) equivalents ANSI/JPI 150 and 300: 4 inches (RF) equivalents Flange standard JIS; JIS B 2220 (2004) ANSI; ANSI B 16.5 (1988) JPI; JPI-7S-15-93 Standard pressure side Rc1/2, 1/2NPT internal thread, Rc1/4, 1/4NPT internal thread, atmospheric disconnection hole. TRANSMITTER HANDLING NOTES To get the most from the performance this transmitter can offer, please use it properly noting the points mentioned below. Before using it, please read the Instruction Manual. Transmitter installation notes Wiring notes  WARNING . When installing the transmitter, ensure that gaskets do not protrude from connecting points into the process (such as adapter flange connection points and connecting pipes and flanges). Failure to do so may cause a leak of process fluid, resulting in harm from burns, etc. In addition, if the process fluid contains toxic substances, take safety measures such as wearing goggles and a mask to prevent contact with the skin and eyes and to prevent inhalation. . Use the transmitter within the operating ranges stated in the specifications (for explosionproofing, pressure rating, temperature, humidity, voltage, vibration, shock, mounting direction, atmosphere, etc.). Using the transmitter outside the operating conditions may cause device failure or fire, resulting in a harmful physical risk of burning or the like. . When performing wiring work in explosion-proof areas, follow the work method specified in the explosion-proof guidelines.  CAUTION . After installation, do not use the transmitter as a foothold or put your weight on it. Doing so may cause damage. . Be careful not to hit the glass indicator with tools etc. This could break the glass and cause injury. . The transmitter is heavy. Wear safety shoes and take care when installing it. . Impact to transmitter can damage sensor module.  WARNING . To avoid shocks, do not perform electrical wiring work with wet hands or with live wires.  CAUTION . Do wiring work properly in conformance with the specifications. Wiring mistakes may result in malfunction or irreparable damage to the instrument. . Use a power supply that conforms to the specifications. Use of an improper power supply may result in malfunction or irreparable damage to the instrument. . Use a power supply with overcurrent protection for this instrument. 1 5