No. SS2-MVG100-0100 - 2 - SPECIFICATION Operating Pressure Range -1 to 140 kgf/cm2 {-0.098 to 13.7 MPa} Operating Temperature Range -40 to 120 ..C Test Pressure 210 kgf/cm2 {20.6 MPa} Materials Body Carbon steel (SF440A) or stainless steel (SUSF316) Jointing bolts for instrument SUS304 Extension pipes When body-material is carbon steel then carbon steel (STS370 Sch80) When body-material is stainless steel then Nothing Gasket Teflon Corrosion Finish Body When body-material is carbon steel then Zinc-Plating When body-material is stainless steel then nothing Handle Corrosion-resistant finish Type Without extension pipe :MVG1/MVG2 With extension pipes : MVG1/MVG2 (Select the number of ‘With Extension pipes) Connections Instrument side Without extension pipe : Direct mounting With extension pipes : Flange connection with Extension pipes Process side Flange connection Center to center dimensions Instrument side 54 mm Process side 54 mm Applicable Instruments Direct mounting Flange connection with extension pipes MVG1 / MVG2 MVG1 / MVG2 (Select the number of with extension pipes) JTD910A, 920A, 930A, 960A, JTD720, 520 KDP33, 44 KFD___-44 (Process connection is top or bottom) KDP11, 22 KFD___-11, 22, 33 (Process connection is bottom) STD910, 920, 930, 960 (Process connection is front or top or bottom) KDP11, 22 KFD___-11, 22, 33, 44 (Process connection is top) Note: With or without extension pipes, the mounting flanges of the MVG1 have the same dimensions, and are compatible with all the above models. However, when the Handle of equalizing valves, is front-mounted, application is only possible as shown in the above columns. Weight Without extension pipe MVG1: 1.4 kg MVG2: 1.5 kg With extension pipe MVG1: 3.0 kg MVG2: 3.1 kg