No. SS2-MGS200-0100 Azbil Corporation - 6 - MODEL SELECTION Sanitary detector (15 to 125 mm (1/2 to 5 inches)) PFA lining MGS28U - I II III IV V VI VII VIII - IX - Y W / Options (some options can be selected per each model) Option “Y” must be specified for Azbil Corporation version. Option “W” must be specified for clamp. Basic model no. Selections Optional selections Note) 1. Must be selected for Tag number requirement. 2. Option “G” or “Q” must be specified for gasket. 3. Spare gasket material is determined by the option code “G’ or “Q”. MGS28U - - I Line size 15 mm (1/2 inch) 015 25 mm (1 inch) 025 40 mm (1. inches) 040 50 mm (2 inches) 050 80 mm (3 inches) 080 100 mm (4 inches) 100 125 mm (5 inches) 125 II Lining PFA P III Pipe connection ISO clamp C1 Tri-clamp C2 IV Electrodes SUS316L L ASTM B574 (Hastelloy C-276 equivalent) C Titanium K V Ferrule for welding SUS 304 E SUS316L S VI Electrical connection / Watertight gland Integral type 1 Remote type G1/2 internal thread / without watertight gland 2 G1/2 internal thread / with brass (Ni-plated) watertight gland 3 G1/2 internal thread / with plastic watertight gland 4 1/2NPT internal thread / without watertight gland 5 CM20 internal thread / without watertight gland 6 Pg.13.5 internal thread / without watertight gland 7 G1/2 internal thread / with SUS304 watertight gland 8 VII Installation wiring direction Integral type H Remote type Upstream side (horizontal / vertical piping) A Downstream side (horizontal / vertical piping) B Horizontal piping mounting left side viewed from upstream C Horizontal piping mounting right side viewed from upstream D VIII Calibration Standard calibration 3 point (0, 50, 100%) with master converter A +/- 0.35% of rate calibration (Size 40 to 125 mm (1 1/2 to 5 inches)) U Others .. IX Finish Standard (corrosion-proof) finish 2 Remote style Option Azbil Corporation version (must be selected) Y Traceability certificate B Attaching the Tag number plate to the terminal box (remote type detector) (Note 1) K Attaching the TAG no. plate to the neck section L With 2 pcs.of gaskets (gasket material: EPDM) (Note 2) G Spare gaskets (additional 2 pcs. of gaskets) (Note 3) V With 2 pcs.of gaskets (gasket material: Silicone rubber) (Note 2) Q With clam (2 pcs.) W