- 1 - 4th edition No. SS2-MGA100-0100 MagneW 3000 PLUS Smart Electromagnetic Flowmeter Specially designed signal and excitation cables Model MGA12W Signal cable Excitation cable Figure 1 Cable length by process fluid conductivity 3 5 10 20 50 100 200 500 1000 1 5 10 15 200 100 20 300 50 Conductivity [μS/cm] 2 Cable length[m] OVERVIEW Model MGA12W signal cable and excitation cable are designed for Azbil Corporation's electromagnetic flowmeter MagneW, so that MagneW works with its best performance. MGA12W cable connects a detector and a converter. Maximum cable length is determined by the process fluid conductivity.(See fig.1) SPECIFICATIONS Signal cable 2-core individually-double-shielded cable (nominal cross section 0.75 mm2, OD 11.4 mm) Excitation cable 2-core chloroprene-insulated cabtyre cable (nominal cross section 2 mm2, OD 11.4 mm) Weight Signal cable Approx. 2 kg per 10 meters Excitation cable Approx. 1.5 kg per 10 meters MODEL SELECTION Model no. Selections Description Cable length End terminal processing Detector side Converter side MGA12W-A Signal cable MGA12W-B Excitation cable MGA12W-C Signal cable and excitation cable ...... 3 digits. Unit: m X Without terminals A With terminals for MGG type detector (MG PLUS) B With terminals for KID type C WIth terminals for NNM type X Without terminals A With terminals for MGG / KIX / KIC type 4 10 Specifications are subject to change without notice. “This product is designed for general industrial use.”