Azbil Corporation No. SS2-MTG300-0100 - 9 - MODEL SELECTION MagneW Two-wire PLUS+ Model MTG18A - I II III IV V VI VII VIII IX X XI - XII XIII - Options (some options can be selected per each model) Basic model no. Selections Optional selections Options MTG18A - - I Line size 2.5 mm (0.1 inch) (flange type only) 002 *1 X None Options 5 mm (0.2 inch) (flange type only) 005 *1 B Traceability certificale 10 mm (3/8 inch) (flange type only) 010 *1 C Material certificate (electrode/ 15 mm (0.5 inch) (flange type only) 015 *1 grounding ring) 25 mm (1 inch) 025 G Gasket for plastic piping 40 mm (1. inches) 040 J Tropical treatment 50 mm (2 inches) 050 K with tagging on the converter 65 mm (2. inches) 065 housing *3 80 mm (3 inches) 080 L with tag number plate wired to 100 mm (4 inches) 100 the flowmeter *6 150 mm (6 inches) (flange type only) 150 200 mm (8 inches) (flange type only) 200 II Lining PFA P X Finish / paint Standard paint XII III Pipe connection Wafer JIS10K 11 2 Corrosion-proof paint Wafer JIS16/20K 12 Wafer JIS30K 13 X Bolt and nut None XIII Wafer ANSI 150 21 2 SUS304 (only for wafer type) Wafer ANSI 300 22 Wafer DIN PN10 41 Wafer DIN PN16 42 Wafer DIN PN25 43 Flange JIS10K J1 Flange JIS20K J2 Flange JIS30K J3 Flange JIS10K for 10 mm size flange *2 J4 Flange JIS20K for 10 mm size flange *2 J5 Flange ANSI 150 A1 Flange ANSI 300 A2 Flange DIN PN10 D1 Flange DIN PN16 D2 Flange DIN PN25 D3 IV Electrode SUS316L L ASTM B574 (Hastelloy C-276 equivalent) C Titanium K Zirconium H Tantalum T Nickel N Platinum-iridium P V Grounding ring SUS316 S ASTM B575 (Hastelloy C-276 equivalent) C Titanium K Note) *1: Flange of size 2.5 to 15 mm detector is 15 mm flange. *2: Available for size 2.5 to 10 mm detector. *3: Must be selected if tagging is required. *4: Must select “Approval 1 or 2”. *5: Must select “Wiring connection D”. *6: This option is not applicable except if the approval/certification code is "X." Zirconium H Tantalum T Platinum P Nickel N VI Wiring connection G1/2 internal thread A G1/2 internal thread with plastic water tight gland B G1/2 internal thread with brass Ni-plated watertight gland C 1/2NPT internal thread (must be selected for FM approval)*4 D CM20 internal thread E G1/2 internal thread with two plastic watertight glands J G1/2 internal thread with two brass Ni-plated watertight gland K VII Face-to-face dimension Standard A Replacement for SMT3000 (for wafer type 40 to 100 mm) S VIII Installation / Display direction Horizontal piping / Right side viewed from upstream A Horizontal piping / Left side viewed from upstream B Horizontal piping / Downstream side C Horizontal piping / Upstream side D Vertical piping / Right side of piping / Flow direction: Upward E Vertical piping mounting / Left side of piping / Flow direction: Upward F IX Calibration Standard J X Output / communication Volume flow 4-20mA DC output/with SFC communication E Volume flow DE output/with communication D Volume flow 4-20mA DC output with HART communication T XI Approval/ Certification None X FM approval, Class I, II, III, Division 1, Groups A, B, C, D, E, F & G, T4 CSA certification, Class I, II, III, Division 1, Groups A, B, C, D, E, F & G, T4 *5 1 FM approval, NI for Class I, II, III, Division 2, Groups A, B, C, D, F & G, T4 CSA certification, Class I, II, III, Division2, Groups A, B, C, D, E, F & G, T4 *5 2 ATEX Type nA certification 4 NPSI Type nA certification Ex nAII T4 to T6 6 Direction of flow Direction of flow Direction of flow Direction of flow Direction of flow Direction of flow Display direction code "A" Display direction code "B" Display direction code "C" Display direction code "D" Display direction code "E" Display direction code "F" Display Display Display Display 4 11