No. SS2-MTG300-0100 Azbil Corporation - 10 - MagneW Two-wire PLUS+ Wafer/Flange remote type converter Model MTG14C - I II III IV - Options (some options can be selected per each model) Basic model no. Selections Options Note) *1: Must be selected if tagging is required. *2: Must select “Wiring connection D”. MagneW Two-wire PLUS+ Wafer/Flange remote type cable Model SMC11 - I II III Basic model no. Selections MTG14C - I Analog output / communication Volume flow 4-20 mA DC output / with SFC communication E Volume flow DE output / with communication D Volume flow 4-20 mA DC output / with HART communication T II Wiring connection G1/2 internal thread A G1/2 internal thread with a plastic water-tight gland B G1/2 internal thread with a brass Ni-plated water-tight gland C 1/2NPT internal thread D CM20 internal thread E III Converter mounting Wall mounting with standard bracket G 2-inch pipe mounting with standard bracket H IV Approval None X FM approval, Class I, II, III, Division 2, Groups A, B, C, D, F & G, T4 CSA certification, Class I, II, III, Division 2, Groups A, B, C, D, E, F & G, T4 *2 2 - V Option None X Traceability certificate B With the Tag number plate on the converter housing *1 K Corrosion-proof paint 2 SMC11 I Cable 2 m (6 feet 8 inches) 02 3 m (10 feet) 03 4 m (13 feet 4 inches) 04 5 m (16 feet 8 inches) 05 10 m (33 feet 4 inches) 10 15 m (50 feet) 15 20 m (66 feet 8 inches) 20 30 m (100 feet) 30 40 m (133 feet 4 inches) 40 50 m (166 feet 8 inches) 50 60 m (200 feet) 60 70 m (233 feet 4 inches) 70 II Terminals for detector With terminals A III Terminals for converter With terminals A