Azbil Corporation SS2-MVC300-0100 - 15 - MODEL SELECTION Steam Flow Meter STEAMcube Model MVC30A - I II III IV - V VI VII VIII - / Options (Some options can be selected per each model.) Model MVC31A - I II III IV - V VI VII VIII - / Options (Some options can be selected per each model.) Selections Additional selections Options Basic model no. MVC30A - MVC31A Selections (detector specification) Line size 25mm 3 40mm 4 50mm 5 80mm 8 100mm A 150mm C Process connection JIS10K wafer type V JIS20K wafer type W JPI/ANSI class 150 wafer type S JPI/ANSI class 300 wafer type T Sealing liquid None (in the case of the integral-type model) X Capillary length None X Additional selections (converter specification) Output allocation (analog output) Open collector pulse (totalized flow rate) + analog (instantaneous flow rate) F Open collector pulse (totalized flow rate) + analog (saturation pressure) P Open collector pulse (totalized flow rate) + analog (saturation temperature) T Burnout direction None X Burnout upper limit U Burnout lower limit D Flow rate output Volume V Standard (pressure) P Density to be substituted (fixed value) C Indicators and display allocation None X Main display for totalized flow rate, and sub display for instantaneous flow rate 1 Main display for totalized flow rate, and sub display for pressure and temperature 2 Main display for instantaneous flow rate, and sub display for totalized flow rate A Main display for instantaneous flow rate, and sub display for pressure and temperature B Electrical conduit and explosionproof construction G1/2, no flameproof construction, one plastic cable gland 1 G1/2, no flameproof construction, two plastic cable glands 2 G1/2, TIIS Flameproof, one pressure-resistant packing-cable gland J G1/2, TIIS Flameproof, two pressure-resistant packing-cable glands T Mounting/ direction of flow Horizontal piping from left to right 1 Horizontal piping from right to left 2 Options Options None XX High-accuracy specification C1 Bolt and nut assembly (carbon steel) * For wafer type only N1 Bolt and nut assembly (SUS304) * For wafer type only N2 Material of bolts and nuts used on the cover flange - SUS304 H7 Test report T1 4 17