No. SS2-MGG41F-0100 Azbil Corporation - 8 - MagneW3000 PLUS+ Smart Converter Fieldbus model (Remote style) Model MGG14C - I II III IV - V VI VII VIII - Options (Some options can be selected per each model.) Basic model no. Selections Optional selections Note) 1. Must be selected for Tag no. requirement 2. Must specify Munsell No. 3. When process fluid level in the flowtube is under electrodes, this function is activated and display and output are latched to zero. 4. Consalt an Azbil Corp. representative. 5. Must be specified when ordering. MGG14C - I Power supply 100 to 120 V AC, 200 to 240V AC, 47 to 63Hz M 24 V DC, noise filter 50 Hz P 24 V DC, noise filter 60 Hz R II Output signal / Communication FONUDATION Fieldbus F III Electrical connection / Watertight gland G1/2 internal thread / with brass (Ni-plated) watertight gland 2 G1/2 internal thread / with plastic watertight gland 3 1/2NPT internal thread / without watertight gland 4 CM20 internal thread / without watertight gland 5 Pg13.5 internal thread / without watertight gland 6 G1/2 internal thread / with SUS304 watertight gland 7 IV Installation / Wiring direction Wall mounting with standard bracket G 2-inch pipe mounting with standard bracket H Wall mounting with SUS304 bracket J 2-inch pipe mounting with SUS304 bracket K V Finish Corrosion-resistant finish 1 Corrosion-proof finish 2 VI Display with data setting device With display D VII Contact inputs / outputs None X VIII Style code None X Options Azbil Corporation version (Note 5) Y Empty pipe detection function (Note 3) A Traceability certificate for converter C Plastic (Polycarbonate) window G Indication other than SI units (Note 5) H Attachment of the TAG number to the terminal box for converter (Note 1) J Specific color paint (Note 2) L Scale diagnostic function (Note 4) V