- 1 - 13th edition No. SS2-MGG200-0100 MagneW3000 PLUS Smart Electromagnetic Flowmeter Detector (General, FM/CSA Nonincendive Approval) Model MGG18, MGG19, MGG11 Size 2.5 to 600 mm (0.1 to 24 inches) Size 700 to 1100 mm (28 to 44 inches) OVERVIEW The MagneW3000 PLUS electromagnetic flowmeter detector is a high performance, highly reliable flowmeter developed with Azbil Corporation's proven MagneW3000 flow measurement technologies. Model MGG18 (watertight model) and model MGG19 (submersible model) offer superior process flowrate measurement and couple with a wide range of MagneW3000 PLUS converters. FEATURES High performance lining . A new, exclusive high quality lining technology and a special mirror-finish PFA lining offers higher anti-adhesive properties than existing models. . The mirror-finish PFA lining is particularly applicable for measurement of sticky pulp and gypsum slurries. . Only pure white PFA with no additives is used to make new linings. . The successful embedded punch plate that offers proven performance under conditions such as rapid thermal change and negative pressure. PFA linings with diameter ranges from 2.5 mm to 600 mm (0.1 to 24 inches) are available, making selection of the best lining easy for a wide variety of applications. Replacement interfacing detector (optional) . This detector can replace the detector interfaces of our existing models and those of other manufacturers. Please consult an Azbil Corp. representative for details. Rugged detector structure . A stainless steel case has been adopted for sizes of 2.5 mm to 200 mm (0.1 to 8 inches). . A watertight structure effective for environments where moisture and condensation tends to occur is used for the water-tight model (model MGG18). A wide variety of piping connections . A hose or union joint or clamp can be selected for very small size models (diameters of 2.5 to 15 mm (0.1 to 1/2 inches)). . A flange structure is available for all sizes (sizes of 2.5 to 1100 mm (0.1 to 44 inches). . A wafer construction can be also selected (sizes of 2.5 to 200 mm (0.1 to 8 inches)). . Sizes of 65 and 125 mm (2. and 5 inches) have been added to our existing product lineup. Compatibility . Remote model converters can be used in combination with our conventional converters. Please consult an Azbil Corp. representative for details. Type of protection Model MGG 18/19 are suitable for use in FM/CSA Nonincendive Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; Class III, Division 2. Improved Accuracy Specification The standard accuracy is +/- 0.5 % of rate. Also available is an optional high accuracy calibration rated at +/- 0.35 % of rate (sizes of 40 mm to 350 mm (1. to 14 inches), combined with MGG14C). 4 3 Specifications are subject to change without notice. “This product is designed for general industrial use.”