No. SS2-MGG200-0100 Azbil Corporation - 2 - APPLICATIONS Pulp and paper Pulp liquids, chemicals, corrosive liquids, industrial water, wastewater, etc. Petroleum/petrochemical/chemicals Corrosive liquids, dyestuffs, chemicals, industrial water, waste water, etc. Public utilities Water supply systems, sewage systems, community drainage, human waste, sludge, sediment slurry, regulation of total effluent, etc. Food Potable water, light, medium and high density fluids, industrial water, waste water, etc. Steel/nonferrous metals/ceramics Aluminum slurry, cooling water, industrial water, corrosive liquids, wastewater, etc. Machinery/equipment/electric machinery Corrosive liquids, cooking water, circulating water, industrial water, wastewater, etc. Construction Building material slurry, sediment slurry, cement slurry, industrial water, etc. Shipbuilding Sediment slurry etc. Electric power Corrosive liquids, cooling water, industrial water, wastewater, etc. Gas Circulating water for air conditioning, etc. FUNCTIONAL SPECIFICATIONS Type of protection Model MGG18, MGG11 JIS C 0920 watertight model NEMA TYPE4X, IEC IP67 Model MGG19 JIS C 0920 submersible model NEMA TYPE6P, IEC IP68 FM approval for MGG18 and MGG19 Nonincendive for Class I, Division 2, Groups A, B, C and D Suitable for Class II, Division 2, Groups F and G Suitable for Class III, Division 2, indoor and outdoor (type 4X) hazardous locations. CSA approval for MGG18 and MGG19 Nonincendive for Class I, Division 2, Groups A, B, C, and D For Class II, Division 2, Groups E, F and G For Class III for used with non-flammable process fluids. Ship Classification Approved by NK (Nippon Kaiji Kyokai) Approval No.: 11A008 Note: The MGG18/19/11 cannot be installed on the bridge or deck of the ship. In the case of a remote model, the cables between the converter and detector must be covered with a flexible metal conduit. Line size 2.5, 5, 10, 15, 25, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100 mm (0.1, 0.2, 3/8, 1/2, 1, 1., 2, 2., 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20, 24, 28, 32, 36, 40, 44 inches) Flange rating JIS 10K, JIS 16K, JIS 20K, JIS 30K, JPI 150, JPI 300, ANSI 150, ANSI 300, DIN PN10, DIN PN16, DIN PN25, DIN PN40 (Size 2.5 to 65 mm (0.1 to 2.5 inches)) JIS 10K, JIS 16K, JIS 20K, JIS 30K, JIS G3443-2 F12 JPI 150, JPI 300,ANSI 150, ANSI 300, DIN PN10, DIN PN16, DIN PN25, DIN PN40 (Size 80 to 200 mm (3 to 8 inches)) JIS 10K, JIS 16K, JIS 20K, JIS G3443-2 F12 JPI 150, JPI 300, ANSI 150, ANSI 300, DIN PN10, DIN PN16, DIN PN25 (Size 250 to 600 mm (10 to 24 inches), PFA/ETFE lining) JIS 10K, JIS G3443-2 F12, JPI 150, ANSI 150, DIN PN10 (Size 700 to 1100 mm (28 to 44 inches), chloroprene rubber lining) Reference flange standard JIS B 2210 (1984) ANSI B16.5 (1988) JPI-7S-15-93