No. SS2-MGG200-0100 Azbil Corporation - 10 - Union / Hose / Clamp type (2.5 to 15 mm (0.1 to 1/2 inch)) PFA lining Model MGG18U - I II III IV V VI VII VIII IX - X - Y / Options (some options can be selected per each model) Basic model no. Selections Optional selections Note: 1. Must be selected for CSA/FM NI approval 2. Must be selected for Tag no. requirement MGG18U - - I Line size 2.5 mm (0.1 inch) 002 5 mm (0.2 inch) 005 10 mm (3/8 inch) 010 15 mm (1/2 inch) 015 II Lining PFA P III Piping connection Union joint R1/2 (PT1/2) external thread U1 Union joint 1/2NPT external thread U2 Union joint R1/2 (PT1/2) internal thread U3 Union joint 1/2NPT internal thread U4 Hose joint H1 IDF clamp C1 Tri clamp C2 IV Electrode SUS316L L ASTM B574 (Hastelloy C-276 equivalent) C Titanium K Zirconium H Tungsten carbide (only for size 10 mm or upper) W Others .. V Grounding ring SUS316 S VI Electrical connection / watertight gland Integral type 1 Remote type G1/2 internal thread / without watertight gland 2 G1/2 internal thread / with brass (Ni-plated) watertight gland 3 G1/2 internal thread / with plastic watertight gland 4 1/2NPT internal thread / without watertight gland (Note 1) 5 CM20 internal thread / without watertight gland 6 Pg 13.5 internal thread / without watertight gland 7 G1/2 internal thread / with SUS304 watertight gland 8 VII Face-to-face Standard A VIII Installation / wiring direction Integral type H Remote type Upstream side (horizontal / vertical piping mounting) A Downstream side (horizontal / vertical piping mounting) B Horizontal piping mounting / left side viewed from upstream C Horizontal piping mounting / right side viewed from upstream D IX Calibration Standard A Others .. X Finish Standard X Corrosion-resistant finish 1 Corrosion-proof finish 2 Options Azbil Corporation version (must be selected) Y Traceability certificate for detector B Material certificate (only for electrodes and ground rings) C Attachment of the TAG number to the terminal box for detector (Note 2) K