- 1 - 7th edition No. SS2-MGG200-0200 MagneW3000 PLUS Smart Electromagnetic Flowmeter Detector (FM/CSA Explosionproof Approval) Model MGG17 Wafer type Flange type Size 2.5 to 400 mm (0.1 to 16 inches) OVERVIEW The MagneW3000 PLUS electromagnetic flowmeter detector is a high performance and highly reliable flowmeter developed with Azbil Corporation's proven MagneW3000 flow measurement technologies. Model MGG17 for FM/CSA Explosion-proof use offer superior process flowrate measurement and couple with a wide range of MagneW3000 PLUS converters. FEATURES High performance lining . A new, exclusive high quality lining technology and a special, mirror-finish PFA lining offer higher anti-adhesive properties than existing models. . The mirror-finish PFA lining is particularly applicable for measurement of sticky pulp and gypsum slurries. . Only pure white PFA with no additives is used to make new linings. . The successful embedded punch plate that offers proven performance under conditions such as rapid thermal change and negative pressure. . PFA linings with diameter ranges from 2.5 mm to 400 mm available, making selection of the best lining easy for a wide variety of applications. Replacement interfacing detector (optional) . This detector can replace the detector interfaces of our existing models and those of other manufacturers. Please consult an Azbil Corp. representative for details. Rugged detector structure . A stainless steel case has been adopted for sizes of 2.5 mm to 200 mm. A wide variety of piping connections . A flange structure is used for all diameters (sizes of 15 to 400 mm (1/2 to 16 inches)). . A wafer construction can be also selected (sizes of 2.5 to 200 mm (0.1 to 8 inches)). . Sizes of 65 and 125 mm (2. and 5 inches) have been added to our existing product lineup. Compatibility . Remote model converters can be used in combination with our conventional converters. Please consult an Azbil Corp. representative for details. Type of protection . Model MGG 17 are approved by FM and CSA to be used in Class I, Division 1, Groups B, C, and D; Class II, Division 1, Groups E, F and G; Class III, Division 1 locations.(Only electrodes within the detector are of intrinsically safe circuits) 4 5 Specifications are subject to change without notice. “This product is designed for general industrial use.”