No. SS2-MGG200-0200 Azbil Corporation - 4 - PERFORMANCE SPECIFICATIONS Accuracy (in combination with the model MGG14C converter) Vs = Velocity of setting range Vs = Velocity of setting range PHYSICAL SPECIFICATIONS Main body material Measuring pipe materials SUS304 stainless steel Flange SUS304 stainless steel (size 15 to 65 mm (1/2 to 2. inches)) Carbon steel + corrosion-preventive painting (size 80 to 400 mm (3 to 16 inches)) Case SCS13 stainless steel (size 2.5 to 15 mm (0.1 to 1/2 inch)) SUS304 stainless steel (size 25 to 200 mm (1 to 8 inches)) SS400 carbon steel (size 250 to 400 mm (10 to 16 inches)) Terminal box Aluminum alloy Paint Standard Terminal box Baked acrylic paint Detector case (size 250 to 400 mm (10 to 16 inches)) Epoxy paint Corrosion-resistant paint Terminal box Baked acrylic paint Detector case (size 250 to 400 mm (10 to 16 inches)) Epoxy paint Corrosion-proof paint Terminal box Baked acrylic paint Detector case (size 250 to 400 mm (10 to 16 inches)) Epoxy paint Color Light beige (Munsell 4Y7.2/1.3) Process wetted material Lining PFA Electrode SUS316L, ASTM B574 (Hastelloy C-276 equivalent), titanium, zirconium, tantalum, tungsten-carbide, platinum/iridium Ground ring SUS316, ASTM B575 (Hastelloy C-276 equivalent), titanium, zirconium, tantalum, platinum Gasket PTFE (if the grounding ring is not made of SUS316) INSTALLATION Electrical connection 1/2 NPT internal thread Pipe connection Wafer (size 2.5 to 200 mm (0.1 to 8 inches)) Flange (size 15 to 400 mm (1/2 to 16 inches)) Nuts and bolts (for models of wafer construction) S20C carbon steel, SS304 stainless steel Grounding Resistance less than 100 .. Length of straight pipe Upstream side A minimum five straight pipe diameters A minimum 10 straight pipe diameters is required if a diffuser / valve / pump is installed upstream side Downstream side Two straight pipe diameters is recommended Cable (between remote detector and converter) Maximum length 300 m (984 ft) (depending on fluid conductivity) Outer diameter 10 to 12 mm (0.4 to 0.47 inch) Vs (m/s) Velocity during measurement > Vs × 40 % Velocity during measurement < Vs × 40 % 1.0 < Vs < 10 ±0.5 % of rate ±0.2 % of Vs 0.1 < Vs < 1.0 ±(0.1/Vs+0.4)% of rate ±0.4(0.1/Vs+0.4)% of Vs Vs (m/s) Velocity during measurement > Vs × 20 % Velocity during measurement < Vs × 20 % 1.0 < Vs < 10 ±0.5 % of rate ±0.1 % of Vs 0.1 < Vs < 1.0 ±(0.1/Vs+0.4)% of rate ±0.2(0.1/Vs+0.4)% of Vs