No. SS2-MGN200-0200 Azbil Corporation - 4 - Flow measurement with submersible electromagnetic flowmeter installed in the open channel. Flow measurement with submersible electromagnetic flowmeter installed at intake end of channel. Flow measurement with submersible electromagnetic flowmeter installed in the pit. Flow measurement with submersible electromagnetic flowmeter installed at discharge and channel. Flow measurement with submersible electromagnetic flowmeter installed in the discharge tube. Discharge flow measurement with submersible electromagnetic flowmeter with the elbow flange installed in the prefabrication sewage disposal plant. Figure 4 Example of installation Note) 1) It is recommended that a gate with lifting device be used. If there is a possibility that the upstream water level becomes lower than the inlet port of the detector, a downstream weir plate or a adaptor must be installed to avoid exposing the measuring pipe in the air. 2) MagneW3000, submersible electromagnetic flowmeter, can be mounted in direct or reverse direction, however, wiring connection must be made accordingly. Figure 5 Terminal connections Weir Mounting gate X Y + - + - H N G A B C Converter Exciting current Power Pulse I/OUT Input signal Detector Power supply Class D grounding Pulse The submersible electromagnetic flowmeter is provided with a cable (10 m). 4-20mA Class D grounding