No. SS2-MGG410-0100 Azbil Corporation - 6 - PHYSICAL SPECIFICATION Housing and cover material Aluminum alloy (ADC 12) Glass Tempered glass (thickness 5 mm (0.2 inch)) Name plate material SUS304 (thickness 0.5 mm (0.02 inch)) Screw material SUS304 Gasket material between housing and cover EPDM Paint Standard: baked acrylic resin Corrosion-proof: Epoxy resin Color Cover: light beige (Munsell 4Y7.2/1.3) Housing: dark beige (Munsell 10YR4.7/0/5) INSTALLATION SPECIFICATION Ambient temperature -25 to +60 degree C (-13 to 140 degree F) Ambient humidity 5 to 100 %RH (no condensation) Vibration Integral style: 500 Hz max. 4.9 m/S2 (0.5 G) (16.076 ft/S2) max. Remote style: 500 Hz max., 19.6 m/S2 (2 G) (64.304 ft/S2) max. Conduit connection G1/2 (PF1/2) internal thread, 1/2NPT internal thread, CM20 internal thread, pg13.5 internal thread Mounting Remote style: Wall mounting, 2-inch pipe mounting Integral style: Mount on the detector Grounding Grounding resistance: 100 Ω max. Weight 3.1 kg (6.83 lb) Site selection When selecting an installation site for the flowmeter, observe the following safety measures: . Do not install the flowmeter near high-current power lines, motors or transformers to prevent damage from electromagnetic induction, which can cause equipment malfunction or output errors. . Do not use the flowmeter to ground a welder. It can damage the flowmeter. . Be sure to ground the welding power transformer when welding near the flowmeter to avoid output errors. . Avoid locations subject to severe vibration or highly corrosive atmospheres to prevent detector breakage or equipment damage. . Do not install the flowmeter in a location subject to direct sunlight, wind and rain. The converter and detector can be damaged.