Azbil Corporation No. SS2-SLX100-0100 - 7 - OPTIONAL SPECIFICATIONS Corrosion-resistant finish Standard Baked acrylic finish Corrosion-resistant finish Baked acrylic finish, fungus-proof finish Corrosion-proof finish Baked epoxy finish, fungus-proof finish Built-in indicator . Digital LCD indicator (optional) . Digital actual scale (SI unit) available . Liquid level display (%, mm) . Specific gravity display . Available to set from -3000 to +3100 (limit of resolution is 0.1) (4.5 digits) arbitrary. For actual scale, specify the following items when ordering. . Actual scale range . Actual scale unit (mm) Each setting are executed using the communicator. Elbow This is an adaptor to match the electric conduit connection to field wiring conditions, from horizontal to vertical visa versa. One or two can be selected depending on the field installation requirements. Oil-free / Water-free treatment (only for SUS material) Measuring range of 1000 mm or less: Delivered after eliminating oil and water from wetted surface. Oil-free treatment (only for SUS material) Measuring range of 1000 mm or less: Delivered after eliminating oil from wetted surface. Test report This report gives the results of testing, including the external appearance of the liquid level meter, input / output characteristics (3 points), insulation resistance and withstanding voltage tests. Five points check The measuring point of input / output characteristics described on the test report is changed from 3 points (0, 50, 100 %) to 5 points (0, 25, 50, 75, 100 %) Traceability certificate This report consists of three parts; a measurement management system chart, a calibration certificate and a test report. Mil sheet Test results of chemical composition, heat treating conditions and mechanical properties of main materials (torque tube housing, bonnet, chamber) will be submitted as certificate. Color check Result of color check penetration test for welding faults on main materials (bonnet, chamber) will be submitted as certificate. Without float (Please contact to sales representative) Float will not be provided. Please specify if reusing an existing Azbil Corporation's float having the model number NQ..31.., NQI21.., KQP..1.., KFL..00-..1, NQP31.. or NQP21... Without chamber (Please contact to sales representative) Chamber will not be provided. Please specify if reusing an existing chamber having the model number NQI31.., NQI21.., KQP..1.., KFL..00- ..1, NQP31.. or NQP21... 7 1