No. SS2-SLX100-0100 Azbil Corporation - 18 - Cautions for handling the product In order to ensure maximum performance from the product's functions, please handle it properly while paying attention to the following precautions. Please make sure that you read the instruction manual of this product before use. Cautions for installation  WARNING . When installing, make sure that the gasket between process connections (flange connections) does not protrude; otherwise fluid leakage or output error may occur. . Do not operate the instrument beyond the specified pressure, temperature or conditions. Could result in damage to the instrument or fluid leakage which may lead to a serious accident. . Wiring installation in an explosion-proof area must be done in accordance with the procedures stated in the explosion-proof guideline. For an explosion-proof model with explosion- proof cable gland adaptor, make sure that an Azbil Corporation-made certified explosion-proof cable gland adaptor is used. The cable for wiring should have a 60 °C withstanding temperature or higher.*1 Note *1) If temperature class is as listed below, use cables with higher allowable temperature rating: Temp. class Maximum allowable temperature T3 70°C T4 65°C  CAUTION . Do not use this instrument as a step or scaffold after installation. The instrument may be damaged and this may result in injury. . Do not hit indicator's glass window with any tool or hard object. Broken glass may cause the injury. . Make sure that installation has been performed properly. If not, it may result in output error or violation of industry regulations. . This instrument is heavy. Be careful on scaffold and wear safety shoes.  WARNING . Do not perform wiring with wet hands or while the power supply is on. This may result in electric shock.  CAUTION . Make sure that wiring is done properly and checked thoroughly. Incorrect wiring may damage the instrument. . Make sure that the power supply conforms to specifications and is used properly. An incorrect power supply will damage the instrument. When ordering, please specify each of the following: 1) Model number (attach suffix “Z” to the end of basic model number for hydrometer. 2) Name of gas or fluid, type of gas, design temperature, pressure (in particular instrument for High Pressure Gas Law certification). 3) Specific gravity of fluid, its pressure, temperature. 4) Dimension from bottom of flange to top of float (L1) 5) For hydrometer application (range of specific gravity measurement) 6) For interface measurement application (specific gravities of upper and lower fluid) 7) Additional specifications.