Terms and Conditions We would like to express our appreciation for your purchase and use of Azbil Corporation's products. You are required to acknowledge and agree upon the following terms and conditions for your purchase of Azbil Corporation's products (system products, fi eld instruments, control valves, and control products), unless otherwise stated in any separate document, including, without limitation, estimation sheets, written agreements, catalogs, specifi cations and instruction manuals. 1. Warranty period and warranty scope 1.1 Warranty period Azbil Corporation's products shall be warranted for one (1) year from the date of your purchase of the said products or the delivery of the said products to a place designated by you. 1.2 Warranty scope In the event that Azbil Corporation's product has any failure attributable to azbil during the aforementioned warranty period, Azbil Corporation shall, without charge, deliver a replacement for the said product to the place where you purchased, or repair the said product and deliver it to the aforementioned place. Notwithstanding the foregoing, any failure falling under one of the following shall not be covered under this warranty: 1. Failure caused by your improper use of azbil product (noncompliance with conditions, environment of use, precautions, etc. set forth in catalogs, specifi cations, instruction manuals, etc.); 2. Failure caused for other reasons than Azbil Corporation's product; 3. Failure caused by any modifi cation or repair made by any person other than Azbil Corporation or Azbil Corporation's subcontractors; 4. Failure caused by your use of Azbil Corporation's product in a manner not conforming to the intended usage of that product; 5. Failure that the state-of-the-art at the time of Azbil Corporation's shipment did not allow Azbil Corporation to predict; or 6. Failure that arose from any reason not attributable to Azbil Corporation, including, without limitation, acts of God, disasters, and actions taken by a third party. Please note that the term "warranty" as used herein refers to equipment-only-warranty, and Azbil Corporation shall not be liable for any damages, including direct, indirect, special, incidental or consequential damages in connection with or arising out of Azbil Corporation's products. 2. Ascertainment of suitability You are required to ascertain the suitability of Azbil Corporation's product in case of your use of the same with your machinery, equipment, etc. (hereinafter referred to as "Equipment") on your own responsibility, taking the following matters into consideration: 1. Regulations and standards or laws that your Equipment is to comply with. 2. Examples of application described in any documents provided by Azbil Corporation are for your reference purpose only, and you are required to check the functions and safety of your Equipment prior to your use. 3. Measures to be taken to secure the required level of the reliability and safety of your Equipment in your use Although azbil is constantly making efforts to improve the quality and reliability of Azbil Corporation's products, there exists a possibility that parts and machinery may break down. You are required to provide your Equipment with safety design such as fool-proof design,*1 and fail-safe design*2 (anti-fl ame propagation design, etc.), whereby preventing any occurrence of physical injuries, fi res, signifi cant damage, and so forth. Furthermore, fault avoidance,*3 fault tolerance,*4 or the like should be incorporated so that the said Equipment can satisfy the level of reliability and safety required for your use. *1. A design that is safe even if the user makes an error. *2. A design that is safe even if the device fails. *3. Avoidance of device failure by using highly reliable components, etc. *4. The use of redundancy. 3. Precautions and restrictions on application Azbil Corporation's products other than those explicitly specifi ed as applicable (e.g. azbil Limit Switch For Nuclear Energy) shall not be used in a nuclear energy controlled area (radiation controlled area). Any Azbil Corporation's products shall not be used for/with medical equipment. The products are for industrial use. Do not allow general consumers to install or use any Azbil Corporation's product. However, azbil products can be incorporated into products used by general consumers. If you intend to use a product for that purpose, please contact one of our sales representatives. In addition, you are required to conduct a consultation with our sales representative and understand detail specifications, cautions for operation, and so forth by reference to catalogs, specifi cations, instruction manual, etc. in case that you intend to use azbil product for any purposes specifi ed in (1) through (6) below. Moreover, you are required to provide your Equipment with fool-proof design, fail-safe design, anti-fl ame propagation design, fault avoidance, fault tolerance, and other kinds of protection/safety circuit design on your own responsibility to ensure reliability and safety, whereby preventing problems caused by failure or nonconformity. 1. For use under such conditions or in such environments as not stated in technical documents, including catalogs, specifi cation, and instruction manuals 2. For use of specifi c purposes, such as: .. Nuclear energy/radiation related facilities [For use outside nuclear energy controlled areas] [For use of Azbil Corporation's Limit Switch For Nuclear Energy] .. Machinery or equipment for space/sea bottom .. Transportation equipment [Railway, aircraft, vessels, vehicle equipment, etc.] .. Antidisaster/crime-prevention equipment .. Burning appliances .. Electrothermal equipment .. Amusement facilities .. Facilities/applications associated directly with billing 3. Supply systems such as electricity/gas/water supply systems, large-scale communication systems, and traffi c/air traffi c control systems requiring high reliability 4. Facilities that are to comply with regulations of governmental/public agencies or specifi c industries 5. Machinery or equipment that may affect human lives, human bodies or properties 6. Other machinery or equipment equivalent to those set forth in items (1) to (5) above which require high reliability and safety 4. Precautions against long-term use Use of Azbil Corporation's products, including switches, which contain electronic components, over a prolonged period may degrade insulation or increase contact-resistance and may result in heat generation or any other similar problem causing such product or switch to develop safety hazards such as smoking, ignition, and electrifi cation. Although acceleration of the above situation varies depending on the conditions or environment of use of the products, you are required not to use any Azbil Corporation's products for a period exceeding ten (10) years unless otherwise stated in specifi cations or instruction manuals. 5. Recommendation for renewal Mechanical components, such as relays and switches, used for Azbil Corporation's products will reach the end of their life due to wear by repetitious open/close operations. In addition, electronic components such as electrolytic capacitors will reach the end of their life due to aged deterioration based on the conditions or environment in which such electronic components are used. Although acceleration of the above situation varies depending on the conditions or environment of use, the number of open/close operations of relays, etc. as prescribed in specifi cations or instruction manuals, or depending on the design margin of your machine or equipment, you are required to renew any Azbil Corporation's products every 5 to 10 years unless otherwise specifi ed in specifi cations or instruction manuals. System products, fi eld instruments (sensors such as pressure/fl ow/level sensors, regulating valves, etc.) will reach the end of their life due to aged deterioration of parts. For those parts that will reach the end of their life due to aged deterioration, recommended replacement cycles are prescribed. You are required to replace parts based on such recommended replacement cycles. 6. Other precautions Prior to your use of Azbil Corporation's products, you are required to understand and comply with specifi cations (e.g., conditions and environment of use), precautions, warnings/ cautions/notices as set forth in the technical documents prepared for individual Azbil Corporation's products, such as catalogs, specifi cations, and instruction manuals to ensure the quality, reliability, and safety of those products. 7. Changes to specifi cations Please note that the descriptions contained in any documents provided by azbil are subject to change without notice for improvement or for any other reason. For inquires or information on specifi cations as you may need to check, please contact our branch offi ces or sales offi ces, or your local sales agents. 8. Discontinuance of the supply of products/parts Please