Azbil Corporation No. SS2-VFR100-0200 - 9 - Note) *1. Face-to-face dimensions of the multi-hole plate specification (built-in type) will not be changed. *3. Use joint sheet gaskets to connect pipes. If spiral gaskets are used, because a non-standard gasket is needed under the following conditions, use a gasket matching the inner diameter of the gasket-contacting surface. . Nominal size 1" and ANSI150/300 (only the inner diameter on the seat ring side is non-standard) Table 11 Dimension and weight in flange connection [Unit: mm] Nominal size (inch) Pressure rating Actuator model No. K d *3 A P H G M N Weight (kg) 1 JIS10K, ANSI150, JPI150 RSA1D (R) 165 37 195 218 255 75 128 23 17 JIS20K, ANSI300, JPI300 18 1 . JIS10K, ANSI150, JPI150 RSA1D (R) 165 50 201 218 255 75 128 23 19 JIS20K, ANSI300, JPI300 21 2 JIS10K, ANSI150, JPI150 RSA1D (R) 178 61 205 218 255 75 128 23 22 JIS20K, ANSI300, JPI300 24 3 JIS10K, ANSI150, JPI150 RSA2D (R) 216 87 312 350 365 150 240 35.5 58 JIS20K, ANSI300, JPI300 63 4 JIS10K, ANSI150, JPI150 RSA2D (R) 229 112 315 350 365 150 240 35.5 66 JIS20K, ANSI300, JPI300 74 [Unit: mm] Nominal size (Inch) Mounting position of valve on process pipes (SV0512-XXX) L 1 100,101,500,501,010,011,020,021 197 200,201,600,601,030,031,040,041 200 300,301,700,701,050,051,060,061 203 400,401,800,801,070,071,080,081 200 1. 100,101,500,501,010,011,020,021 196.5 200,201,600,601,030,031,040,041 200 300,301,700,701,050,051,060,061 203.5 400,401,800,801,070,071,080,081 200 2 100,101,500,501,010,011,020,021 196 200,201,600,601,030,031,040,041 200 300,301,700,701,050,051,060,061 204 400,401,800,801,070,071,080,081 200 3 100,101,500,501,010,011,020,021 287 200,201,600,601,030,031,040,041 295 300,301,700,701,050,051,060,061 303 400,401,800,801,070,071,080,081 295 4 100,101,500,501,010,011,020,021 285 200,201,600,601,030,031,040,041 295 300,301,700,701,050,051,060,061 305 400,401,800,801,070,071,080,081 295 4 1