No. SS2-8110-3100 Azbil Corporation - 4 - Please, read ‘Terms and Conditions’ from following URL before the order and use. http://www.azbil.com/products/bi/order.html (11) 1-12-2 Kawana, Fujisawa Kanagawa 251-8522 Japan http://www.azbil.com/ Specifications are subject to change without notice. No part of this publication may be reproduced or duplicated without the prior written permission of Azbil Corporation. 7th edition: Aug. 2015 DIMENSIONS Note) *The dimensions of A, B, and H might vary depending on connections. The above figures show the larger ones. Table 5 External dimensions and weight [Unit: mm] Nominal size (inches) External dimensions (mm) Actuator model No. Connection A* B* H* T Weight (kg) 80 380 145 715 45 51 GOM 83S JIS 5K JIS 10K 100 385 150 715 45 52 125 410 175 715 45 53 150 420 185 720 45 54 200 455 220 740 45 56 250 480 245 770 45 61 300 505 270 795 50 71 350 550 310 920 55 113 GOM 103S 400 570 330 945 55 124 450 600 370 970 60 133 500 625 395 995 60 142 JIS 2K 550 660 430 1020 60 150 600 710 450 1115 70 180 GOM 124S 650 735 475 1140 70 190 700 760 500 1165 70 206 750 795 535 1190 70 235 800 825 565 1215 80 275 900 875 615 1230 80 350 1,000 925 665 1240 80 500 Ordering Information When ordering, please specify ; 1) 2) 3) 4) 5) 6) 7) Model Number: VBL Nominal size Type of end connections Material of valve body, vane, valve stem, and plain metal Type of actuator Valve action (direct or reverse) Accessories (positioner, pressure regulator with filter, etc.) 8) 9) 10) 11) 12) 13) Special requirement of degreasing, copper prohibitive treatment, etc. Name of flow medium Normal flow and maximum required flow Pressure of flow medium, upstream and downstream pressure at maximum and minimum, required flow Temperature and specific gravity of flow medium Viscosity of flow medium, inclusive or exclusive of slurry Figure 2 External Dimensions