No. SS2-AMT100-0100 Azbil Corporation - 4 - Allowable differential pressure Note) 1) .. Positioner is necessary ..: Can be operated either with or without positioner. 2) Table care not to cause the maximum allowable differential pressure to exceed the maximum operating pressure disignated by ANSI B16.34-1981 or JIS B2201-1984. PTFE packing Table 4 Mixing service by AMT Actuator model no. Supply pressure kPa {kgf/cm2} Spring range kPa {kgf/cm2} Positioner Differential pressure [by port size (inches)] kPa {kgf/cm2} 3/4 1 1. 2 2. 3 4 5 6 PSA1D, R 140 {1.4} 20 to 98 {0.2 to 1.0} .. 410 {4.2} 250 {2.6} 170 {1.7} 98 {1.0} 340 {3.5} 80 to 240 {0.8 to 2.4} .. 2880 {29.4} 1780 {18.1} 1210 {12.3} 720 {7.3} HA2D, R 140 {1.4} 20 to 98 {0.2 to 1.0} .. 790 {8.1} 490 {5.0} 330 {3.4} 200 {2.0} 120 {1.2} 90 {0.9} 50 {0.5} 340 {3.5} 80 to 240 {0.8 to 2.4} .. 3920 {40.0} 3480 {35.5} 2300 {23.5} 1390 {14.2} 860 {8.8} 620 {6.3} 340 {3.5} HA3D, R 140 {1.4} 20 to 98 {0.2 to 1.0} .. 590 {6.0} 350 {3.6} 220 {2.2} 160 {1.6} 90 {0.9} 50 {0.5} 40 {0.4} 340 {3.5} 80 to 240 {0.8 to 2.4} .. 3920 {40.0} 2480 {25.3} 1530 {15.3} 1100 {11.2} 620 {6.3} 390 {4.0} 270 {2.8} HA4D, R 140 {1.4} 20 to 98 {0.2 to 1.0} .. 370 {3.8} 260 {2.7} 150 {1.5} 98 {1.0} 60 {0.6} 340 {3.5} 80 to 240 {0.8 to 2.4} .. 2650 {27.0} 1900 {19.4} 1070 {10.9} 690 {7.0} 470 {4.8} Table 5 Diverting service by AMT Actuator model no. Supply pressure kPa {kgf/ cm2} Spring range kPa {kgf/cm2} Positioner Differential pressure [by port size (inches)] kPa {kgf/cm2} 3/4 1 1. 2 2. 3 4 5 6 PSA1D, R 140 {1.4} 20 to 98 {0.2 to 1.0} .. 410 {4.2} 250 {2.6} 170 {1.7} 98 {1.0} 340 {3.5} 80 to 240 {0.8 to 2.4} .. 820 {8.4} 510 {5.2} 340 {3.5} 200 {2.1} HA2D, R 140 {1.4} 20 to 98 {0.2 to 1.0} .. 790 {8.1} 490 {5.0} 330 {3.4} 200 {2.0} 120 {1.2} 90 {0.9} 50 {0.5} 340 {3.5} 80 to 240 {0.8 to 2.4} .. 1600 {16.3} 990 {10.1} 670 {6.8} 390 {4.0} 240 {2.5} 180 {1.8} 98 {1.0} HA3D, R 140 {1.4} 20 to 98 {0.2 to 1.0} .. 590 {6.0} 350 {3.6} 220 {2.2} 160 {1.6} 90 {0.9} 50 {0.5} 40 {0.4} 340 {3.5} 80 to 240 {0.8 to 2.4} .. 1180 {12.0} 710 {7.2} 430 {4.4} 310 {3.2} 180 {1.8} 110 {1.1} 80 {0.8} HA4D, R 140 {1.4} 20 to 98 {0.2 to 1.0} .. 370 {3.8} 260 {2.7} 150 {1.5} 98 {1.0} 60 {0.6} 340 {3.5} 80 to 240 {0.8 to 2.4} .. 760 {7.7} 540 {5.5} 300 {33.1} 200 {2.0} 130 {1.3} A AB B AB A B