- 1 - 4th Edition No. SS2-8193-0300 Corrosion- / Abrasion-Resistant Type Ceramic Control Valves Model HIC OVERVIEW Model HIC ceramic control valves are a straightthrough type of control valves that let fluids flow smoothly without clogging. Their bodies and wet parts are mode of high-performance ceramics highly resistant against mechanical abrasion and chemical corrosion. They are best suited for control of fluids, including hard slurries, that require resistance against abrasion and corrosion. SPECIFICATIONS Body Type Straight-through, Ceramic control valve Nominal size 1, 1., 2, 2., 3 inches Pressure rating Maximum operating pressure: 1960kPa {20kgf/cm2} (Maximum test pressure: 2940kPa {30kgf/cm2}) Operating temperature 0 to 200°C Thermal shock resistance Aluminum ceramic: 70°C Silicon carbide ceramic: 150°C Note) Do not apply thermal shock over these values. End connection Wafer type Equivalent to JIS 10K RF, 20K RF Equivalent to ANSI Class 150 RF, 300 RF Bolts (material: SNB7) and nuts (material: S45C) are supplied as standard accessories. Material Body: 99% aluminum ceramic, Silicon carbide ceramic Body casing: FCD450, SCS13 Bonnet Plain bonnet (0 to 200°C) Gland type Screwed gland Packing PTFE yarn packing (Grease not provided) Note) PTFE: Polytetrafluoroethylene Gasket Type Flat type gasket with scraper Material PTFE reinforced with carbon fiber O-ring Fluoric rubber (AFLAS) Trim Material Valve plug: 99% aluminum ceramic, Silicon carbide ceramic Packing box: same as valve plug Non-wetted parts: SUS316 Actuator Type Single acting diaphragm actuator (Type PSA, HA) Action Direct or reverse action Diaphragm Cloth embedded ethylene propylene rubber 5 5 Specifications are subject to change without notice. “This product is designed for general industrial use.”