No. SS2-8193-0300 Azbil Corporation - 4 - Please read the "Terms and Conditions" from the following URL before ordering or use: http://www.azbil.com/products/bi/order.html (10) 4th Edition: Issued in June 2012 1-12-2 Kawana, Fujisawa Kanagawa 251-8522 Japan URL: http://www.azbil.com/ Specifications are subject to change without notice. No part of this publication may be reproduced or duplicated without the prior written permission of Azbil Corporation. DIMENSIONS Table 4 Face-to-face dimensions Note) Face-to-face dimensions conform to following standards. - IEC 60534-3-2 : 2001 - JIS B2005-3-2 : 2005 Table 5 External dimensions Table 6 Weight Nominal size (inches) 1 1. 2 2. 3 A (mm) 102 114 124 148 165 Nominal size (inches) 1 1. 2 2. 3 H (mm) Direct action 465 520 685 735 780 Reverse action 460 515 675 725 770 A (mm) 218 218 267 267 267 Nominal size (inches) 1 1. 2 2. 3 Weight (kg) 13.5 16.0 26.5 31.5 36.5 Ordering information When ordering, please specify; 1) 2) 3) 4) 5) 6) 7) Model number: HIC Nominal size × Port size Body rating and type of end connection Body and trim material Type of actuator, and supply air pressure Valve action (direct or reverse) Necessity of positioner or pressure regulator with filter 8) 9) 10) 11) 12) 13) Necessity of special spec. such as oil-free, free from copper, etc. Name of flow medium Normal flow and maximum required flow Pressure of flow medium, upstream and downstream pressure (at fully closed and sully opened) Temperature and specific gravity of flow medium Viscosity of flow medium, inclusive or exclusive of slurry H A Figure 2. Face-to-face and external dimensions