- 1 - 8th edition No. SS2-8210-0200 OVERVIEW The G-O-Motor is a pneumatic actuator that features compact in size, powerful in output and long stroke. G-O-Motors have wide range of application such as actuators for butterfly valves, vane control of blowers, variable resistors or any other mechanical controls requiring a proportional position control. Both spring type and spring-less type are available. SPECIFICATIONS Spring Types Types Vertical type, spring type piston actuator Action Direct action Material . Cylinder Cast iron FC200 . Piston Cast iron FC200 . Piston rod Stainless steel SUS403 . O-ring Nitril butadiene rubber Input With Model HTP pneumatic positioner 20 to 100 kPa {0.2 to 1.0 kgf/cm2} 20 to 60 kPa {0.2 to 0.6 kgf/cm2} 60 to 100 kPa {0.6 to 1.0 kgf/cm2} With model AVP/HEP electro-pneumatic positioner 4~20mA DC, 4 to 12mA DC, 12 to 20mA DC Spring range 20 to 98 kPa {0.2 to 1.0 kgf/cm2} Supply pressure 140 kPa {1.4 kgf/cm2} Air consumption (normal state) With model HTP pneumatic positioner: 7Nl/min or less. With model AVP/HEP positioner: 4Nl/min or less. Air connection (normal sate) Rc1/4 internal thread Ambient temperature 0°C to +70°C Optional accessories Positioner*, pressure regulator with filter, hand wheel*, limit switch, solenoid valve, motion transmitter, booster relay, lock-up valve, and others. Note) 1) For the optional items, refer to the specification sheets and installation drawing of respective accessories. 2) Accessories with the asterisk mark (*) are selected from the following types depending on the actuators to be combined. Actuator Positioner Hand wheel P/P I/P Top Side Spring type GOM HTP AVP/HEP THM - G-O-Motor Spring or Spring-less Type Piston Cylinder Actuator Model GOM 7 15 Specifications are subject to change without notice. “This product is designed for general industrial use.”