No. SS2-8210-0200 Azbil Corporation - 2 - Performance Output Refer to Table 1. Accuracy Hysteresis error: Within 1%F.S. Linearity: Within ±1%F.S. Dimensions and weight Refer to Figure 1 and Table 4. Finish Blue (Munsell 10B5/10), silver or other specified colors. Spring-less Types Types Vertical or horizontal type, spring-less type piston actuator Action Direct or reverse action Material . Cylinder Cast iron FC200 . Piston Cast iron FC200 . Piston rod Stainless steel SUS403 . O-ring Nitril butadiene rubber . G-O-pilot Body: Aluminum alloy Feedback mechanism case: Cast iron FC200 Input With Model G-O-Pilot pneumatic positioner 20 to 100 kPa {0.2 to 1.0 kgf/cm2} 20 to 60 kPa {0.2 to 0.6 kgf/cm2} 60 to 100 kPa {0.6 to 1.0 kgf/cm2} With model AVP/HEP electro-pneumatic positioner 4 to 20mA DC, 4 to 12mA DC, 12 to 20mA DC Supply pressure 200 kPa {2.0 kgf/cm2} Air consumption (normal state) With model G-O-Pilot pneumatic positioner: 10Nl/min or less. With model AVP/HEP positioner: 4Nl/min or less. Air connection (normal sate) Rc1/4 internal thread Ambient temperature 0°C to +70°C Optional accessories Positioner*, pressure regulator with filter, hand wheel*, limit switch, solenoid valve, motion transmitter, booster relay, lock-up valve, and others. Note) 1) For the optional items, refer to the specification sheets and installation drawing of respective accessories. 2) Accessories with the asterisk mark (*) are selected from the following types depending on the actuators to be combined. *1: Only available for GOM64LM, GOM84LM, and GOM124LM. *2: Remote type AVP (Model# AVP2_ _ )shuold be sellected. Performance Output Refer to Table 1. Accuracy Hysteresis error: Within 2%F.S. Linearity: Within ±1%F.S. Dimensions and weight Refer to Figure 2,3,4 and Table 5 to 7. Finish Blue (Munsell 10B5/10), silver or other specified colors. Notes on Installation In case of outside installation, please apply waterproof and dust-proof measures to G-O-Motor. Table 1 Output power (Spring type) Note) The power are shon for the strokes at upper and lower limits. Table 2 Output power (Spring-less type (Vertical type, with manual hand wheel)) Actuator Positioner Hand wheel P/P I/P Top Side Spring-less type GOM (Vertical type) G-O-Pilot AVP *1 THM - Spring-less type GOM (Horizontal type) G-O-Pilot AVP *2 - SHM Basic Model No. Cylinder dia.x Travel (mm) Power N {kgf} Downward Upward GOM 83 S φ200×75 2740 to 930 {280 to 95.0} 440 to 2300 {45.0 to 235} GOM 84 S φ200×100 2740 to 930 {280 to 95.0} 440 to 2300 {45.0 to 235} GOM 103 S φ250×75 4310 to 1420 {440 to 145} 740 to 3630 {75.0 to 370} GOM 104 S φ300×100 6280 to 2060 {640 to 210} 1030 to 5200 {105 to 530} Basic Model No. Cylinder dia.x Travel (mm) Power N {kgf} Feed back Thrust mechanism N {kgf} Torque N-m{kgf-cm} Rotating angle 60° GOM 64LM φ150×100 2650 {270} 228 {2330} Plate cam type GOM 84LM φ200×100 4610 {470} 399 {4070} Plate cam type GOM 124LM φ300×100 10800 {1100} 934 {9520} Plate cam type GOM 154LM φ380×100 16700 {1700} 1444 {14720} Plate cam type