No. SS2-AVP702-0100 Azbil Corporation - 6 - MODEL SELECTION *1: One set of TIIS Flameproof cable gland shall be attached for model AVP702. Two sets are for model AVP701. Individual specifications . Device TAG No. (8 character): . Long TAG No.(max 32 character): . Input Range : 4 to 20mA (Standard) _ _._ _ to _ _._ _mA Note: Minimum span 4mA . Input Characterization: Linear(Standard), Equal persentage, Quick opening, User-defined . Positioner action: Direct(Single acting actuator), Reverse (Single acting actuator), Double acting actuator . Supply pressure classification 150 < Ps < 300kPa (Standard) 140 < Ps < 150kPa, 300 < Ps < 400kPa, 400 < Ps < 450kPa, 450 < Ps < 700kPa . Unit of pressure gauge kPa (Standard), MPa, bar, psi, kgf/cm2 . Valve closed position DOWN(Standard), UP . Actuator type Linear (Standard) Rotary 90, Rotary 60, Rotary sub90, Rotary sub60 . Travel Transmitter fail safe derection (Model AVP701 only) DOWN(Standard), UP AVP701 (1) (2) (3) - (4) (5) (6) (7) - (8) (9) AVP702 XEFACDNGB (2) Connection Electrical connection G1/2 G 1/2NPT N M20 × 1.5 M SB .... D X A XV .... None X X Model KZ03 pressure regulator with filter (Mounted on Positioner) M 1 Model KZ03 pressure regulator with filter (with bracket for separated mount) M 2 Extention lever (In case of without mounting bracket) M L Seal tape prohibited M J Mounting bracket material SUS316 (In case of with mounting bracket) M 6 Mounting bracket (PSA1, 2) Y S Mounting bracket (PSA3, 4) Y Q Mounting bracket (PSA6, VA4 to 6) Y L Mounting bracket (PSA7) Y 8 Mounting bracket (HA1) Y A Mounting bracket (HA2, HL2) Y T Mounting bracket (HA3, HL3) Y C Mounting bracket (HA4, HL4) Y N Mounting Bracket (VR1) Y V Mounting Bracket (VR2,3) Y R Mounting Bracket (VR3H) Y 6 Mounting Bracket (RSA1) Y F Mounting Bracket (RSA2) Y U Mounting Bracket (old model PSA3, 4 (those produced before 1999)) Y Y Mounting Bracket (VA1 to 3 (former model Motion Connector), 800-1, 2, 3) Y W Mounting Bracket (VA4, 5 (former model Motion Connector), 800-4, 5) Y J Mounting Bracket (VP5,6) Y 1 Mounting Bracket (VP7) Y 7 Mounting bracket (DAP560, 1000, 1000X (stroke: 100mm max.)) Y 4 Mounting bracket (DAP1500, 1500X (stroke: 100mm max.)) Y 5 INMET RO Flameproof/Dust ignion protecon (Electrical connecon G1/2 is not available) NEPSI Flameproof/Dust ignion protecon (Electrical connecon G1/2 is not available) IECEX Flameproof/Dust ignion protecon (Electrical connecon G1/2 is not available) Rc1/4 M8 (3) Finish 1/4NPT Corrosion proof (Baked urethane) Analog signal (4 to 20 mAdc) with Travel Transmission and HART communication Protocol Analog signal (4 to 20 mAdc) with HART communication Protocol - FM Explosionproof/Dust ignion protecon (Electrical connecon G1/2 is not available) TIIS Flameproof (Electrical connecon G1/2 only) with cable gland *1 Watwe-proof ATEX Flameproof/Dust ignion protecon (Electrical connecon G1/2 is not available) FMC Explosionproof/Dust ignion protecon (Electrical connecon G1/2 is not available) (8) (9) Option (6) Diagnostic (7) Overvoltage protection None Overvoltage protection (Input impedance +125 Ω) (1) Structure Advanced Diag (with four pressure sensors) (4) (5) Display Display with push button Standard (Baked acrylic) 1/4NPT EAC Flameproof (Electrical connecon G1/2 is not available) Air piping connection Rc1/8 M8 M8 Rc1/8 Mounting thread Rc1/8 Pressure gauge thread