Azbil Corporation No. SS2-AVP703-0100 - 5 - Note) . A LAS requires parameters other than those listed here to operate. Please refer to the user's manual that comes with your LAS device. . The T3 needs to be set between 15 seconds and 60 seconds. *1. The unit is octet time (256 μs). Octet time is the time required to handle 8 bits of data on the Fieldbus Network. *2. The unit is slot-time. Supply voltage 9 to 32 V Maximum Current 20 mA Registration Interoperability test ITK 6.1 approved. Typical installation Figure 1 shows the wiring for the model AVP703. Figure 1 Wiring for model AVP703 FB FB Fieldbus Another fieldbus device 7 2