No. SS2-AVP703-0100 Azbil Corporation - 6 - MODEL SELECTION *1: One set of TIIS Flameproof cable gland shall be attached for model AVP703. Individual specifications . PD_TAG (max 32 character): ____________________________ . NODE_ADRESS: 0x___________ . Input Characterization: Linear (Standard), Equal persentage, Quick opening, User-defined . Psitioner action: Direct (Single acting actuator), Reverse (Single acting actuator), Double acting actuator . Supply pressure classification: 150 < PS < 300 kPa (Standard) 140 < Ps < 150 kPa, 300 < Ps < 400 kPa, 400 < Ps < 450 kPa, 450 < Ps < 700 kPa . Unit of pressure gauge: kPa (Standard) , MPa, bar, psi, kgf/cm2 . Valve closed position: DOWN (Standard), UP . Actuator type: Linear (Standard) Rotary 90, Rotary 60, Rotary sub90, Rotary sub 60 AVP703 FOUNDATION Fieldbus - (1) (2) (3) - (4) (5) (6) (7) - (8) (9) (1) Structure XEFACDNGB Electrical connection Air piping connection Mounting thread G1/2 Rc1/4 M8 G 1/2NPT 1/4NPT M8 N 1/2NPT 1/4NPT 5/16-8UNC U M20 x 1.5 1/4NPT M8 M Standard (Baked acrylic) S Corrosion proof (Baked urethane) B - Display with push button D X (6) (7) Diagnostic Advanced Diag (with four pressure sensors) A X - None X X Model KZ03 pressure regulator with filter (Mounted on Positioner) M 1 Model KZ03 pressure regulator with filter (with bracket for separated mount) M 2 Extention lever (In case of no mounting bracket) M L Seal tape prohibited M J Mounting bracket material SUS316 (In case of with mounting bracket) M 6 Mounting bracket (PSA1, 2) Y S Mounting bracket (PSA3, 4) Y Q Mounting bracket (PSA6, VA4 to 6) Y L Mounting bracket (PSA7) Y 8 Mounting bracket (HA1) Y A Mounting bracket (HA2, HL2) Y T Mounting bracket (HA3, HL3) Y C Mounting bracket (HA4, HL4) Y N Mounting Bracket (VR1) Y V Mounting Bracket (VR2,3) Y R Mounting Bracket (VR3H) Y 6 Mounting Bracket (RSA1) Y Mounting Bracket (RSA2) Y U F Mounting Bracket (old model PSA3, 4 (those produced before 1999)) Y Y Mounting Bracket (VA1 to 3 (former model Motion Connector), 800-1, 2, 3) Y W Mounting Bracket (VA4, 5 (former model Motion Connector), 800-4, 5) Y J Mounting Bracket (VP5,6) Y 1 Mounting Bracket (VP7) Y 7 Mounting bracket (DAP560, 1000, 1000X (stroke: 100mm max.)) Y 4 Mounting bracket (DAP1500, 1500X (stroke: 100mm max.)) Y 5 Water-proof TIIS Flameproof (Electrical connection G1/2 only) with cable gland *1 FM Explosionproof/Dust ignition protection (Electrical connection G1/2 is not available) FMC Explosionproof/Dust ignition protection (Electrical connection G1/2 is not available) ATEX Flameproof/Dust ignition protection (Electrical connection G1/2 is not available) IECEX Flameproof/Dust ignition protection (Electrical connection G1/2 is not available) Rc1/8 Rc1/8 (3) Finish (2) Connection Pressure gauge thread Rc1/8 NEPSI Flameproof/Dust ignition protection (Electrical connection G1/2 is not available) EAC Flameproof (Electrical connection G1/2 is not available) INMETRO Flameproof/Dust ignition protection (Electrical connection G1/2 is not available) (8)(9) Option (4) (5) Display Rc1/8