Azbil Corporation No. SS2-AVP772-0100 Ambient temperature limits General model: -40 to +80 °C TIIS Flameproof: -20 to +55 °C FM/FMC/ATEX/IECEx/NEPSI/KOSHA/EAC/INMETRO Explosion Proof: .30 to +75 °C FM intrinsically safe (iC) and Nonincendive: .24 to +75 °C However, the LCD usage range is 0 to 50 °C Ambient humidity limits 5-100% RH Vibration Characteristics 20 m/s2 (5-400 Hz) (vibration within the positioner main unit) Finish and color Finish: baked acrylic; color: silver Material Aluminum alloy Weight ................................................................................................................................ Performance Accuracy ±1.0% FS (±2.5% FS with user-defined output ..................................................), ±1.5% FS if: 4 mA . input signal < 8 mA (see Table 1) Travel transmission accuracy ±1.0% FS (±2.5% FS with user-defined output ..................................................) *1 Stroke coverage 14.3 to 100 mm (when the feedback lever rotation angle is between ±4° to ±20°) *1: Only applies when the travel transmission is provided (Model AVP 7..1). In such a case, a power supply circuit for travel transmission is necessary. *2: Only applies when the contact output is provided (Model AVP 7..0). In such a case, a power supply circuit for contact output is necessary. Note: Depending on the inside diameter and length of the air pipes, optimal operation may not be possible using auto-setup alone. In such cases, please set the control parameters. Structure Waterproof: JIS C0920 TIIS Flameproof: Ex d IIC T6 FM Explosionproof / Dust Ignition Protection: Explosionproof (Division System): Class I, Division 1, Group B, C, D T6 .. .................................................................................................... .. .......................................................................................................... ............................................................................................................................ Dust Ignition Protection (Division System): Class II, III, Division 1, Group E, F, G T6 .......................................................................................................................................... Container protection grade: IP66 FM Intrinsically Safe (ic) and Nonincendive .. .............................................................................. .. ............................................................ Entity Parameters: Input Circuit Side: Ui=30 V, Ii=100 mA, Pi=1 W, Ci=24 nF, Li=0.22 mH Travel Transmission Circuit (Model AVP 7..1): Ui=30 V, Ii=100 mA, Pi=1 W, Ci=20 nF, Li=0.22 mH Contact output circuit (Model AVP 7..0): Ui=30 V, Ii=100 mA, Pi=1 W, Ci=20 nF, Li=0.22 mH Nonincendive (Division System) Class I, Division 2, Group A, B, C and D, T4 Nonincendive Field Wiring Parameters: Input Circuit Side: Vmax=30 V, Imax=100 mA, Ci=24 nF, Li=0.22 mH Travel Transmission Circuit (Model AVP 7..1): Vmax=30 V, Imax=100 mA, Ci=20 nF, Li=0.22 mH Contact output circuit (Model AVP 7..0): Vmax=30 V, Imax=100 mA, Ci=20 nF, Li=0.22 mH Suitable Class II and Class III, Division 2, Group E, F and G, T4 Container Protection Grade: NEMA Type 4X, IP66 FMC Explosionproof / Dust Ignition Protection Explosionproof (Division System): Class I, Division 1, Group C, D T6 .. .................................................................................................... .. ...................................................................................................... .. .................................................................................................................... .. .. .......................................................................................................................................... Explosionproof (Division System): Class II, III, Division 1, Group E, F, G T6 Container protection grade: IP66 ATEX Flameproof / Dust Ignition Protection Flameproof: II 2 G Ex d IIC T6 Gb Dust Ignition Protection: II 2 D Ex tb IIIC T85 °C Db Container Protection Grade: IP66 Please use Ex d IIC authorized products as the cable grounds for connecting it to the electrical wiring port. However, please use IP66-approved products when using it in an environment that requires IP66. IECEx Flameproof / Dust Ignition Protection Flameproof: Ex d IIC T6 Gb Dust Ignition Protection: Ex tb IIIC T85 °C Db Container Protection Grade: IP66 Please use IECEx Ex d IIC-approved products as the cable ground for connecting it to the electrical connection port. However, please use IP66-approved products when using it in an environment that requires IP66. 3 7 3