No. SS2-PSA200-0100 Azbil Corporation - 2 - Performance Output Varies depending on utilized spring range and air supply pressue. Accuracy Table 1 Hysteresis error and linearity [Within %F.S.] Note) When no positioner is provided, performance varies by the type pf packing used. Dimensions and weight Refer to Figure 1, 2 and Table 2 and 3. Finish Blue (Munsell 10B5/10), or silver, or other specified colors. Spring range 20 to 98kPa 80 to 240kPa {0.2 to 1.0 kgf/cm2} {0.8 to 2.4 kgf/cm2} Item PSA1 PSA2 to 4 PSA1 PSA2 to 4 Hysteresis error Without positioner 5 3 - - With positioner 1 1 1 1 Linearity Without positioner ±5 ±5 - - With positioner VPE ±3 - ±3 - HTP - ±1 - ±1 AVP/HEP ±2 ±1 ±2 ±1 DIMENSIONS Table 2 Dimensions and weight of Multismotors Model No. Stroke (mm) Dimensions (mm) Nominal diaphragm area (cm2) Maximum diaphragm chamber capacity (cm3) Weight L H ....d t K ....B B (kg) PSA1D, R 14.3 106/93 305 56 22 M9 × 1 220 235 160 800 20 113/93 295 M12 × 1.25 700 8 25 113/88 305 56 22 M9 × 1 600 PSA2D, R 20 113/93 325/350 56 22 M12 × 1.25 270 285 310 1400 11 PSA3D, R 20 179/141 455/485 80 30 M15 × 1.5 350 365 550 2700 28 38 3800 PSA3D, R 20 179/141 510/535 80 30 M15 × 1.5 470 490 950 6600 46 38 8600 Note) 1) Dimension L is as with air pressure 0 kPa {kgf/cm2}. 2) The model numbers and L dimensions are listed with those of the direct action in the left value and those of the reverse action in the bottom right value. B K screw H L t O S Figure 1 Dimensions of Multismotor