Azbil Corporation No. SS2-8213-0500 - 3 - Table 3 Multismotor with side-mounted hand wheel Table 4 Multismotor with top-mounted hand wheel Figure 4 Dimensios of actuator with positioner Model No. Stroke (mm) Dimensions (mm) Max. operating force required at hand wheel (N[kgf]) Weight A ....B B C ....D H S (kg) HA2D HA2R 14.3 289 267 281 37 280 (200) 334 287 140 [14] (190) ([19]) 25 25.0 38.0 57 354 26 HA3D HA3R 25.0 347 350 363 46 355 407 345 280 [29] 49 38.0 50.0 98 459 50 HA4D HA4R 38.0 476 470 520 114 570 612 474 450 50.0 [46.0] 120 75.0 Note) 1) Dimension B is as shown in Figure 1. 2) Figures in parenthesis in “. D dimensions” and “maximum operating force required at hand wheel” colomns show for general bonnet of HLS single seated-control valve, when No.3 or No.4 disignated to SS2-8113-0200 is selected for pipe installation position. If valve and pipe sizes are for mounting with reducer, seslect pipe installation position of No.1, No.2, or top-hand wheel. Figure 2 Dimensions of Multismotor with side-mounted hand wheel Model No. Stroke (mm) Dimensions (mm) Max. operating force required at hand wheel (N[kgf]) Weight ....B B ....D H (kg) HA2D HA2R 14.3 267 281 200 D:575 R:558 140 [14] 23 25.0 38.0 D:595 R:591 24 HA3D HA3R 25.0 350 363 355 D:694 R:682 250 [26] 46 38.0 50.0 98 47 HA4D HA4R 38.0 470 520 570 1010 400 50.0 [41] 110 75.0 Figure 3 Dimensions of Multismotor with top-mounted hand wheel a. With HTP positioner c. With AVP300 positioner c. With AVP700 positioner b. With HEP positioner H C B .. S D .. B H max. To Bottom yoke D .. B .. 7 10