No. SS2-PTG300-0100 Azbil Corporation - 36 - MODEL SELECTION Smart pressure transmitter model PTG7XT Process connection: Remote seal with ferrule clamp type Measuring span: 2.0 to 100 kPa, 40 to 400 kPa, 0.2 to 2 MPa Model number structure: Basic model number - Selection - Option1 - Option2 Selection Option1 Option2 Note) *1 Applicable only for water and dust proof “N” and FM intrinsically safe “E” in the Type of protection. - - - Product description Gauge pressure transmitter: Ferrule type with remote seal with SFN Communication PTG71T Gauge pressure transmitter: Ferrule type with remote seal with HART Communication PTG72T - Type of protection Water and dust proof: IEC IP67 Electrical connection:1/2NPT N FM Explosionproof and dust-ignition Electrical connection:1/2NPT D FM Intrinsically safe Electrical connection: 1/2 NPT E KOSHA Flameproof Electrical connection: 1/2 NPT K NEPSI Flameproof and dust-ignition Electrical connection:1/2 NPT L ATEX Flameproof Electrical connection: M20 × 1.5 V Measuring span 2.0 to 100 kPa (0.021 to 1.019 kgf/cm2) (Not applicable for process connection 1S) 3 40 to 400 kPa (0.408 to 4.07 kgf/cm2) 4 0.2 to 2 MPa (2.04 to 20.3 kgf/cm2) 5 Material: Diaphragm / wetted parts other than diaphragm/fill fluid SUS316L/SUS316L/Propylene glycol CB Process connection IDF 1.5S ferrule clamp type AH3X IDF 2S ferrule clamp type AH4X Capillary length 1 m (with Olefin tube) E 3 m (with Olefin tube) G 5 m (with Olefin tube) J Option 1 - No option X Corrosion-proof finish B Built-in digital indicator M Wetted parts finish Oil free finish G Water and oil free finish H Electrolytic grinding K Passive state finish W Option2 - No option X Test report 1 Material certificate 2 Withstand pressure test 4 Strength calculation sheet (JIS) 5 Traceability certificate 6 Non SI unit F Mounting bracket H Electrical connection: M20 × 1.5 adapter *1 T