No. SS2-GTX00A-0100 Azbil Corporation - 8 - (Continued from previous page) *11 In case code J is selected, code C “Tantalum” of Material (Centerbody) should be selected. *12 Not applicable for the combination with code A2 "With external Zero/Span adjustment", Q1 "Safety Transmitter", and Q2 "NAMUR NE43 Compliant Output signal limits" of Option. *13 Not applicable for the combination with code D of Bolt/nut. *14 In case this code is selected, code P8 of Option code should be selected. *15 In case code X, H, or D is selected, the material of transmitter case is aluminum alloy. Model No.:GTX_ _A-Selection I(I II III IV V VI VII) - Selection II(I II III IV V VI) - Option *4 No need to select when Fill Fluid code H, or J is selected. *5 Not applicable for the combination with code A2, or Q7 of Option. *6 Not applicable for the combination with code A, or B of Process installation. *7 Not applicable for the combination with code F1, F6 of Explosion proof. *8 Not applicable for any Explosion proof. Please select code XX “None” of Explosion proof. *9 Applicable for “ASTM B575”, code B of Material (center body). *10 Not applicable for the combination with code B “M20 watertight” of Electrical connection. *11 Not applicable for the combination with code X “None” of Indicator. Please select “With indicator”. *12 Not applicable for the combination with code F2, F5, F6, N2, N5, E2, E5, A2 and A5 of Explosion proof. *13 In case code P8 is selected, code D of Bolt/nut should be selected. *14 In case code P8 is selected, code E of Paint should be selected. *15 In case code P8 is selected, code X or 2 of Mounting bracket shoult be selected. Option XX No options A2 External Zero adjustment *11 G1 One elbow (left) *6 *7 *10 G2 One elbow (right) *6 *7 *10 G3 2 elbows *6 *8 *10 G4 Long vent/drain plugs G6 Side vent/drain top *6 G7 Side vent/drain bottom *6 K1 Oil and water free finish K3 Oil free finish *4 P8 316 SST (Parts in contact with atmosphere) *13 *14 *15 Q1 Safety Transmitter *5 Q2 NAMUR NE43 Compliant Output sign limits:3.8 to 20.5mA (Output 21.6mA/selected upper limit, 3.6mA/selected lower limit) Q7 Alarm Output (contact output) *12 R1 Custom calibration T1 Test report T2 Mill certificate T4 Traceability certificate T5 NACE certificate *9 W1 Non SI Unit