No. SS2-GTX00D-0100 Azbil Corporation - 4 - Figure 1 Working pressure and temperature of wetted parts section (for general purpose models) Figure 2 Working pressure and temperature of wetted parts section (for oxygen and chlorine service) Figure 3 Working pressure and temperature of wetted parts section (for model GTX15D regular type) Figure 4 Working pressure and temperature of wetted parts section (for model GTX15D oxygen service) Supply voltage and load resistance 17.9 to 42V DC. Reverse polarity protection is standard. A load resistance of 250 Ω or more is necessary between loops. See Figure 5. Figure 5 Supply voltage vs. load resistance characteristics Note) For communication with HART communicator or Smart Communicator, a load resistance of 250 Ω or more is necessary. Output Analog output (4 to 20 mA DC) with DE protocol Analog output (4 to 20 mA DC) with HART protocol Digital output (DE protocol) Output signal 3.6 to 21.6 mA 3.8 to 20.5 mA (NAMUR NE43 compliant) Failure Alarm Upper: 21.6 mA or more Lower: 3.6 mA or less 133.3 {1000} 101 80 53 27 13 8.0 5.3 1.3 2.0 {15} -50-40 40 50 60 70 80 90 100110 115 Normal operating range Operative limit Unusable range Operative limit Temperature of wetted parts ( C) Working Pressure P (kPa abs/{mmHg}) 133.3 101.3 53 -40 -10 0 40 75 80 Normal operating range Working pressure P kPa {mmHg} Temperature of wetted parts ( C) Unusable range {1000} {760} {400} 210 {2.1} 0 -70 {-0.7} -40 -15 0 657080 Temperature of wetted parts ( C) Working pressure P (kPa {kgf/cm2} ) Normal operating range Operating limit Operative limit Normal operating range 210 {2.1} 0 -20 {-0.2} -50 {-0.5} -40 -10 0 40 65 70 Temperature of wetted parts ( C) Working pressure P (kPa {kgf/cm2}) 1345 1482 Load resistance (Ω) Supply voltage - 12.5 0.0219 245 0 17.9 42 45 Load resistance (Ω) Supply voltage (V DC) Operating Range = Operative limit 12.5