No. SS2-KFP100-0100 - 3 - Optional Specifications Item Specification (1) External SP setting knob (for local setting) A setting knob is mounted on the door. SP can be adjusted from outside. (2) Built to in manual controller (with auto to manual transfer switch) Consists of a manual control regulator, two position transfer switch and balance check button. (3) Air set (not applicable to panel mounting type) Pressure regulator with filter plus 40 mm pressure gauge. (supply pressure; 200 to 970 kPa {2 to 9.7 kgf/cm2} output; 140 kPa {1.4 kgf/cm2}, pressure gauge; 0 to 200 kPa {0 to 2 kgf/cm2}) Optional Semi to standard and Special Specifications Item Specification (1) Corrosion to resistant and silver finish (Y 138) Corrosion to resistant finish with baked acryl (Y 138A) : Resistant against corrosive gases. Corrosion to proof finish with baked epoxy resin (Y 138B) : Resistant against corrosive liquids. Regular silver finish with baked acryl (Y138C) : To suppress temperature rise caused by direct sunlight or other cause. Corrosion to resistant silver finish with baked acryl (Y 138D) : To suppress temperature rise cause as above and to be resistance against corrosive gases. (note: silver finish is not resistant against alkaline gases.) (2) Oil to free (Y 158) Oil to free treatment. (excluding 20 to 100 kPa {0.2 to 1.0 kgf/cm2}, pneumatic signal receiving type.) 1) Elevation (a) For measuring ranges less than 9.81 MPa {100 kgf/cm2}: Up to 20% of maximum value of span. (b) For measuring ranges 10 MPa {100 kgf/cm2} or over: Up to 10% of maximum value of span. 2) Process pipe connections: Rc., .NPT, Rc., .NPT internal thread 3) Spiral element with pulsation damper 4) Indication only 5) Door lock key 6) Compound meter Bellows type: to 101 to 19.6 kPa { to 760 to 0.2 mmHg} to 101 to 98.1kPa { to 760 to 1 mmHg} to 98.0 to 49.0 kPa { to 1 to 0.5 kgf/cm2} to 98.0 to 98.0 kPa { to 1 to 1 kgf/cm2} to 24.5 to 24.5kPa { to 0.5 to 0.5 kgf/cm2} Spiral type: Standard ranges with 0 to 3.43 MPa {0 to 35 kgf/cm2} Indicating accuracy: +1.5% FS 7) Stainless steel tag plate 8) AUTO/MAN switch viewing window (3) Special order items (the items mentioned in the right are available as special order items.) 9) Pressure gauge (40 mm) for transmitting signal 6 2