No. SS2-KFP100-0100 - 4 - MODEL SELECTION Base Model No. Selections Type Function Control action Type of detector Measuring range Air connection Output pressure unit Mounting method Options Description KFP Pressure indicating controller A0 Indicating transmitter A1 Indicating controller (local type) A2 Indicating transmitter controller (local type) A3 Indicating controller (cascade type) A4 Indicating transmitter controller (cascade type) 0 No selection 1 P + Manual reset 2 PI 3 PID 4 PD + Manual reset 5 PI + Batch 6 On-Off 7 Differential gap 8 P + External reset 9 PD + External reset -01 Spiral type -02 Bellows type -03 Pneumatic signal receiving type 003 Spiral type 0 to 300 kPa {3 kgf/cm2} 004 “ 0 to 400 kPa {4 kgf/cm2} 005 “ 0 to 500 kPa {5 kgf/cm2} 006 “ 0 to 600 kPa {6 kgf/cm2} 010 “ 0 to 1000 kPa {10 kgf/cm2} 015 “ 0 to 1500 kPa {15 kgf/cm2} 020 “ 0 to 2000 kPa {20 kgf/cm2} 025 “ 0 to 2500 kPa {25 kgf/cm2} 035 “ 0 to 3500 kPa {35 kgf/cm2} 050 “ 0 to 5000 kPa {50 kgf/cm2} 070 “ 0 to 7000 kPa {70 kgf/cm2} 100 “ 0 to 10 MPa {100 kgf/cm2} 150 “ 0 to 15 MPa {150 kgf/cm2} 250 “ 0 to 25 Mpa {250 kgf/cm2} 350 “ 0 to 35 MPa {350 kgf/cm2} 760 Bellows type 0 to -101.3 kPa{-760 mmHg} (Negative pressure) 805 “ 0 to 50 kPa {0.5 kgf/cm2} 810 “ 0 to 100 kPa {1.0 kgf/cm2} 815 “ 0 to 150 kPa {1.5 kgf/cm2} 820 “ 0 to 200 kPa {2 kgf/cm2} 821 Pneumatic signal 20 to 100 kPa {0.2 to 1.0 kgf/cm2} receiving type A Rc 1/4 internal thread (When this option chosen, instruction plate becomes Japanese version) B 1/4 NPT internal thread (When this option chosen, instruction plate becomes English version) 1 0.2 to 1.0 kgf/cm2 2 3 to 15 PSI 3 0.2 to 1.0 bar 4 20 to 100 kPa 8 19.6 to 98.1 kPa (equality to 0.2 to 1.0 kgf/cm2) P Panel mounting (pressure regulator with filter cannot be installed) S Wall mounting T 2-inch pipe mounting -X No option -K With external SP setting knob (applicable to type A1 or A2 controller.) -M Built-in manual controller (with auto/manual switch) -7 With pressure regulator with filter